The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.
DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.
The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.
Pumped liquids
The pumps are suitable for:
- Drainage and surface water
- Groundwater
- Industrial process water without solids or fibres.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos RC pumps are used for the circulation of liquid refrigerants in refrigeration systems.
The RC pumps have been designed and optimised for use with CO2 as a refrigerant, but can also be used with NH3 (Ammonia) and selected HFCs.
The low required NPSH and the fact that no traditional loss-generating protective devices are needed can help system designers to reduce the dimensions and cost of the system. The RC pumps have an innovative design in stainless steel which makes specially suited for use with high pressure refrigerants (CO2) – the pump has only one seal between the refrigerant and ambient sides. A version with welded connections eliminates the use of counter flanges and possible leakage in flange connections.
Applications
Grundfos RC pumps are designed for the circulation of liquid refrigerant in refrigeration systems.
Features and benefits
- Barrel-type, semi-hermetic, high-pressure design
- Multistage centrifugal pump
- Canned motor (no shaft seals)
- High energy efficiency
- Wide range for variable speed capacity control
- Low NPSHR and robust to vapour bubbles in inlet
- Installation and service friendly
- Compact and low weight.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.
The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.
All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.
Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.
An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.
Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.
Applications
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Liquids containing fibres from light industry, laundries, etc.
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems
Features and benefits
Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.
The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range. High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.
Applications
Grundfos HS horizontal split case pumps are typically used in these applications:
- Air-conditioning/heating systems
- Public water supply
- District cooling/heating plants
- Cooling systems
- Public waterworks
- Process cooling
- Irrigation.
Features and benefits
- Easy to service: split case design
- Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
- Double volute reduces radial forces and minimises noise and vibration
- Independent bearing housing design allows access to the pump components without removing the top half of the casing
- High energy efficiency
- Low life-cycle costs
- Many product variants available.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.
The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.
The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.
The motor is cooled by the pumped liquid flowing around it.
- Enclosure class: IP 68
- Insulation class: F
The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.
Applications
The Grundfos Unilift KP pumps are designed for the pumping of:
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems.
The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.
The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. There are eleven flow sizes, capable of producing up to almost 50 bar of pressure, and with a variety of shaft seals, rubber materials and supply voltages.
Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimised for their purpose and designed for specific requirements.
Applications
CR pumps provide a complete range of pump solutions so that all applications, industrial and domestic, can benefit from the Grundfos touch. The applications that can be covered include the following:
- Process water systems
- Washing and cleaning systems
- Seawater systems
- Pumping of acids and alkalis
- Ultrafiltration systems
- Reverse osmosis systems
- Swimming baths.
Features and benefits
- Reliability
- High efficiency
- Service-friendly
- Space-saving
- Suitable for slightly aggressive liquids
- High corrosion resistance
- Single-pump solution making high pressures possible.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.
The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.
The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.
Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.
Applications
The pumps are suitable for:
- Drainage
- Effluent
- Wastewater not containing discharge from toilets.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings
- Short rotor shaft.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Now, food industries can meet their strict hygienic requirements with a robust sanitary pump from Grundfos. The F&B-HYGIA® pumps are single-stage, end-suction centrifugal pumps specially developed for the food and beverage industries – hence the “F&B” in the name.
These compact units are designed for flexible use, allowing many different businesses to benefit from their reliable performance.
F&B-HYGIA® pumps are made from AISI 316 stainless steel in a compact design that makes them highly mobile and easy to fit into any system. One of the features that make this compact size possible is the plug-in shaft solution. This also makes service easier.
Applications
- Liquid transfer in breweries and dairies
- Soft-drink mixing
- Syrup and sugar solutions
- Frying oil and blood processing
- Fruit-drink and yeast pumping
- Food processing
- Transfer and circulation pump in water treatment systems and textile treatment systems
- Nearly all kinds of transfer, circulating and process pumping.
Features and benefits
- CIP- and SIP-capable (DIN EN 12462)
- Materials: Rolled, deep-drawn steel AISI 316L (1.4404/1.4435) with electropolished surface
- Gentle liquid handling for sensitive liquids such as fruit juice
- Optimised hydraulics for high efficiency and low energy consumption
- Various motor types
- Shrouded pumps, especially useful for breweries and dairies
- Various pipe connection types and connection sizes
- Robust design for heavy duty operation
- Easy service and maintenance – less downtime
- Trolley-mounted version available
- IE2/IE3 motors
- Modular design concept.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos range of recirculation pumps is the product of decades of engineering experience. Created to handle large flows with low heads, the SRP models are equally suitable for wastewater treatment plants and flood control.
SRP units come in three main variants – DN 300, 500 or 800 mm, fitted with motors from 0.8 to 24 kW. The units share many features with the AMG and AFG gear-driven mixers and flowmakers, making them instantly familiar to service staff and facilitating easy maintenance.
Recent developments include a triple sealing system for maximum protection of the mechanical shaft seal and a bracket that facilitates very easy installation.
Applications
The pumps are suitable for the following applications:
- Re-circulation of sludge within sewage treatment plants
- Storm water pumping.
Features and benefits
- High efficiency stainless steel propeller
- Electronic leak sensor in gearbox/shaft seal housing
- Wide performance range
- Strong axial gear in slim design for high hydrodynamic efficiency
- Integrated overload and overheat protection
- Good self-cleaning capabilities.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
