The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Liquids containing fibres from light industry, laundries, etc.
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems

Features and benefits

Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.

All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.

The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.

Applications

The Unilift KP pumps are designed for the pumping of:

• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Lowering groundwater
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

Pressure Booster : Grundfos Hydro MPC

Grundfos has developed the perfect brains for use with CR-based Hydro booster systems. The Multi Pump Control ( MPC ) maintains its outstanding user friendliness right from the initial installation through to everyday operation.

The large display is easy to navigate, regardless of whether you are using the installation wizard or carrying out day – to – day monitoring. The Ethernet connection option even brings the Hydro MPC interface to your own computer so that matter where you are, you will always be in control.

The Hydro MPC can control up to six pumps connected in parallel, adjusting the speed of each pump to optimize performance at all times.

The Hydro MPC also gives you access to remote data communication, operation statistics, and mauch more.

Features and benefits
– Constant pressure
– Simple installation
– Low-energy
– Wide range

Optional:
– External communication, Control 2000

Applications
Hydro 2000 are suitable for pressure boosting in
– Water supply systems
– Irrigation systems
– Water treatment systems
– Fire fighting systems
– Industrial plants

Technical Data
– Flow Q: max. 720 m3/h
– Head, H: max. 160 m
– Liquid temp.: 0oC to +70oC

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner  – Grundfos Booster Hydro MPC

The Grundfos SQ 3″ submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.

The SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times.

Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.

If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.

Applications

SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:

• Ground water supply – private housing, small waterworks, small irrigation systems
• Liquid transfer in tanks
• Pressure boosting
• Environmental applications – remedial pumping or sampling
• Garages and petrol stations.

Features and benefits

• Dry-running protection
• Permanent magnet motor with high efficiency
• Wear resistance from floating impellers
• Protection against upthrust
• High flow velocity
• Soft-starts reduce wear on motor
• Over- and under-voltage protection
• Overload protection
• Over-temperature protection.

Additional features of the SQE

• Variable motor speed controls (with connection to the CU 301)
• Connection to the CU 301 for two-way communication.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The MAXA range comprise single-stage, end-suction stainless steel centrifugal pumps designed for heavy-duty operation in a variety of food and beverage applications, chemical and industrial processes, and wastewater treatment processes.

The main dimensions and characteristics correspond to EN 733 / ISO2858 The MAXA pumps are available in a special version with specifications to hygienic standards. They are CIP/SIP capable and can meet the GMP requirements regarding FDA-approved material (on request). The main applications are in breweries, the beverage and food industries, and water treatment. However, the MAXA range also meets the requirements of the pharmaceutical industry, surface treatment, the textile industry, etc.

Applications

• Gentle pumping of mash and wort for beer filtration (hot side)
• Liquid transfer in dairies
• Water and wastewater treatment plants
• Liquids with high content of solid particles
• Biofuel applications.

Features and benefits

• Greatest possible flexibility
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404) with electropolished surface
• Gentle liquid handling for sensitive liquids
• Optimised hydraulics
• High efficiency and low energy consumption
• Wide range of motors
• Multiple sealing systems
• Many pump variants
• Shrouded pumps
• Various pipe connection types and sizes
• Two different impeller types
• Robust design for heavy duty operation
• Easy service and maintenance
• ATEX-certified pumps
• Tronic (up to 22kw)
• Flow up to 1200 m³/h

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.

DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.
The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.

Pumped liquids

The pumps are suitable for:

• Drainage and surface water
• Groundwater
• Industrial process water without solids or fibres.

Features and benefits

• Cable plug connection
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings.