Archive for May, 2015

Grundfos Hydro MPC – Booster set

Posted by on Wednesday, 27 May, 2015

Grundfos Hydro MPC – Booster set

Hydro MPC booster sets consist of two to six identical CRI(E)/CR(E) pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

As standard, Hydro MPC booster sets consist of two to six identical CRI(E)/CR(E) pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

Hydro MPC booster sets are supplied as complete, pre-assembled and thoroughly tested booster sets, ready to install.

Most of the booster sets are available with either CR(I) pumps and/or CR(I)E pumps.

Hydro MPC booster sets are divided into seven groups based on control variants.

Hydro MPC’s outstanding reliability and efficiency is the best possible base for our booster systems. Equipped with the intelligent CU 351 controller, the Hydro MPC boosters offer an even higher efficiency and reduced energy costs. The end result is complete control, optimum flexibility of booster output, and unbeatable efficiency at all times.

Hydro MPC booster sets are fitted with hygienic designed manifolds.

Water Supply

Grundfos Hydro MPC boosters are ideal for mains water supply systems and for pressure boosting in multi-storey buildings. The needs for water in multi storey buildings vary a lot during the course of the day – this demands much from the equipment used. With a Grundfos booster system, it is easy to provide optimum user comfort by maintaining constant water pressure at all levels and at all times.

Industry

Industries can also benefit greatly from a booster solution from Grundfos. If you require constant pressure in the face of highly variable flows, Grundfos has the solution. Even the most demanding applications will benefit from the accuracy and advanced pump control in a Grundfos Hydro MPC booster.

Irrigation

A Grundfos Hydro MPC booster system can help conserve water and optimise crop yields by responding to pre-set minimum and maximum levels. Grundfos Hydro MPC is lenient on the pipe net in golf course irrigation systems and adapts the performance automatically to any number of sprinklers at any pressure zone during the irrigation cycle. It is benefits like these that make Grundfos the perfect choice for irrigation systems.

 

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner  – Grundfos Booster Hydro MPC

 

Category: Booster Hydro MPC, Commercial Building Services, Grundfos Pumps   , ,
Comments (1)

Grundfos JP Booster

Posted by on Tuesday, 26 May, 2015

The JP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G 1 or Rp 1. The pump has a built-in ejector with guide vanes for optimum self-priming properties.

JP pumps are available in two material variants.

 

Material variant A: Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.

Material variant B: Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.

 

The robust design makes the pump suitable for fixed installation. The custom-built composite handle is fitted lengthwise.

The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance Single-phase motors have a built-in thermal switch and require no additional motor protection Three-phase motors require external motor protection

Applications

Built for a long, trouble-free working life, the small and handy Grundfos jet pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.

When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.

Features and benefits

  • Self-priming
  • Stable operation even if there is air in the liquid
  • Ideal for small water supply systems
  • Compact and handy.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Category: Groundwater Supply Pumps, Grundfos Circulator Pumps, Grundfos Pumps, Waste Water Pumps, Water Treatmnet Pumps  
Comments (0)

Grundfos Go – Grundfos Mobile Tools

Posted by on Tuesday, 26 May, 2015

Overview

Grundfos GO is the mobile tool box for professional users on the GO. Grundfos GO gives you intuitive handheld pump control, and full access to all the Grundfos Online tools on the go. Grundfos GO consists of two Apps GO Remote and GO CAPS.

Grundfos GO Remote
Grundfos GO Remote gives you intuitive handheld pump control. Save valuable time on pump control, reporting and data collection with the most comprehensive mobile platform on the market. Grundfos GO Remote works with all our e-pumps and communicates both via radio and infra-red technology. It provides easy to follow tips and guidance as well as live pump data feeds.
To communicate with the pumps, special hardware (Mobile Interfaces) from Grundfos is required. The Grundfos GO Remote can be downloaded for free for both Apple iOS and Android devices.

When connected to a Grundfos product, the following features are available:

  • Product Dashboard – gives the user a quick overview of the connected product
  • Status data – monitor status data from the Grundfos product
  • Alarms and warning – see detailed alarm information with timestamps
  • Configuration/commissioning
  • Create installation report in pdf format
  • Read / write profiles – copy configuration from one product to another
  • Supports 28 local languages

Grundfos GO CAPS
GO CAPS works on-line and supports all the basic CAPS functionalities. It is available for Apple iOS devices only, and is free to download. The detailed features are:

  • Search product by: Number, Name or QR code
  • Size a product (Heating, Air-conditioning, Pressure boosting & Wastewater)
  • Catalogue
  • Replace product
  • Compare products
  • Product view
  • Projects
  • Favorites
  • Supports 11 local languages

 


PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner
Category: Grundfos Pumps, Pump Audit   , ,
Comments (0)

Grundfos GHP (Grundfos Hygienic self-Priming)

Posted by on Monday, 25 May, 2015

Grundfos’ new range of GHP (Grundfos Hygienic self-Priming) pumps takes efficiency and durability to new levels in sanitary processes.

 

The pumps are based on the well-known HILGE technology and are further optimised to offer reliable operation even under the tough conditions encountered in cleaning processes.

 

 

 

The single-stage self-priming GHP pumps combine the best of the F&B-HYGIA end-suction pumps with the reliable HILGE technology. The result is an optimised pump range that comes with increased efficiency compared to traditional side-channel pumps and can be counted on for long operational life.

One pump – More applications

Due to the robust construction of the new GHP pumps they are able to handle liquids with a high content of air as is the case in CIP return systems.

In effect, this means that the same pump can be used for product conveyance as well as for the cleaning processes. Compared to side-channel pumps, GHP pumps are also less sensitive to handling products containing particles.

Low noise operation

The GHP pumps feature a new, unique hydraulic technology that allows the impeller to be adjusted to accommodate exact duty-point requirements.

This translates into a noise level significantly lower than compared to traditional side-channel pumps.

Specially designed for sanitary applications

The all-stainless steel GHP pumps have been specially designed for trouble-free operation in sanitary processes such as:

  •  Cleaning processes (CIP return)
  •   Evacuation of tanks and pipes
  •   Pumping liquids with a high gas content
  •   Pumping liquids in Food and Beverage industries

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Category: Grundfos Circulator Pumps, Grundfos Pumps, Industrial Liquid Transfer, Sanitary Pumps, Waste Water Pumps, Water Treatmnet Pumps  
Comments (0)

Grundfos APG

Posted by on Monday, 25 May, 2015

The APG pumps are submersible pumps with a horizontal discharge port. They are specifically designed for the pressurised pumping of sewage and wastewater containing destructible solids. The pumps are equipped with a cutter system which cuts destructible solids into small pieces so that they can be led away through pipes of a relatively small diameter. The pumps are available with or without control box and level switch. Pumps without control box must be connected to a separate pump controller with motor starter.

 

Grundfos APG

 

Applications

The compact design makes these pumps suitable for both temporary and permanent installation. They are suitable for both free-standing installation and installation by means of an auto-coupling guide rail system. The APG pumps are designed for pumping:

  • Sewage
  • Wastewater
  • Wastewater with high content of fibrous material

Features and benefits

  • Integrated cutting system (APG)
  • Dry or submerged installation
  • Installation on auto coupling
  • Sensors in windings

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Category: Grundfos Circulator Pumps, Grundfos Pumps, Submersible, Waste Water Pumps  
Comments (0)

Grundfos SRP

Posted by on Sunday, 24 May, 2015

The Grundfos range of recirculation pumps is the product of decades of engineering experience. Created to handle large flows with low heads, the SRP models are equally suitable for wastewater treatment plants and flood control.

 

SRP units come in three main variants – DN 300, 500 or 800 mm, fitted with motors from 0.8 to 24 kW. The units share many features with the AMG and AFG gear-driven mixers and flowmakers, making them instantly familiar to service staff and facilitating easy maintenance.

 

 

Recent developments include a triple sealing system for maximum protection of the mechanical shaft seal and a bracket that facilitates very easy installation.

Applications

The pumps are suitable for the following applications:

  • Re-circulation of sludge within sewage treatment plants
  • Storm water pumping.

 Features and benefits

  • High efficiency stainless steel propeller
  • Electronic leak sensor in gearbox/shaft seal housing
  • Wide performance range
  • Strong axial gear in slim design for high hydrodynamic efficiency
  • Integrated overload and overheat protection
  • Good self-cleaning capabilities.

 


PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner
Category: Groundwater Supply Pumps, Grundfos Circulator Pumps, Grundfos Pumps, Waste Water Pumps, Water Treatmnet Pumps  
Comments (0)

Grundfos Unilift CC

Posted by on Sunday, 24 May, 2015

The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

 

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

 

 

 

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

 

Applications

The Unilift CC is designed for the pumping of the following:

  • Water and rainwater in horticulture
  • Water from rivers and lakes
  • Rainwater, drainage water and water from flooding
  • Water for filling/emptying containers, ponds, tanks, etc.
  • Effluents from showers, washing machines and sinks below sewer level
  • Pool water
  • Ditch drainage water
  • Groundwater (lowering applications)
  • Effluents from viaducts, underpasses, etc.
  • Drainage water from garage sprinkler systems.

Features and benefits

  • Composite materials
  • Stainless steel strainer
  • Self-venting valve in handle
  • Available with level switch
  • Suitable for low suction levels
  • Light-weight.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner 
Category: Groundwater Supply Pumps, Grundfos Circulator Pumps, Grundfos Pumps, Waste Water Pumps, Water Treatmnet Pumps  
Comments (0)

Grundfos JP Booster

Posted by on Saturday, 23 May, 2015

The JP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G 1 or Rp 1. The pump has a built-in ejector with guide vanes for optimum self-priming properties.

JP pumps are available in two material variants.

 

grundfos JP Booster

Material variant A: Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.

Material variant B: Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.

 

 

The robust design makes the pump suitable for fixed installation. The custom-built composite handle is fitted lengthwise.

The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance Single-phase motors have a built-in thermal switch and require no additional motor protection Three-phase motors require external motor protection

Applications

Built for a long, trouble-free working life, the small and handy Grundfos jet pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.

When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.

Features and benefits

  • Self-priming
  • Stable operation even if there is air in the liquid
  • Ideal for small water supply systems
  • Compact and handy.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Category: Groundwater Supply Pumps, Grundfos Circulator Pumps, Grundfos Pumps, Waste Water Pumps, Water Treatmnet Pumps  
Comments (0)

Grundfos MAXA and MAXANA

Posted by on Saturday, 23 May, 2015

The MAXA/MAXANA ranges comprise single-stage, end-suction stainless steel centrifugal pumps designed for heavy-duty operation in a variety of food and beverage applications, chemical and industrial processes, and wastewater treatment processes.

 

 

 

 

 

 

The main dimensions and characteristics correspond to EN 733 / ISO2858
The MAXA pumps are available in a special version with specifications to hygienic standards. They are CIP/SIP capable and can meet the GMP requirements regarding FDA-approved material (on request).

The main applications are in breweries, the beverage and food industries, and water treatment. However, the MAXA/MAXANA range also meets the requirements of the pharmaceutical industry, surface treatment, the textile industry, etc.

Applications

  • Gentle pumping of mash and wort for beer filtration (hot side)
  • Liquid transfer in dairies
  • Water and wastewater treatment plants
  • Liquids with high content of solid particles
  • Biofuel applications.

Features and benefits

  • Greatest possible flexibility
  • Materials: Rolled, deep-drawn steel AISI 316L (1.4404) with electropolished surface
  • Gentle liquid handling for sensitive liquids
  • Optimised hydraulics
  • High efficiency and low energy consumption
  • Wide range of motors
  • Multiple sealing systems
  • Many pump variants
  • Shrouded pumps
  • Various pipe connection types and sizes
  • Two different impeller types
  • Robust design for heavy duty operation
  • Easy service and maintenance
  • ATEX-certified pumps
  • Tronic (up to 22kw)
  • Flow up to 1200 m3/h

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner 
Category: Grundfos Pumps, Industrial Applications Pumps, Industrial Liquid Transfer, Sanitary Pumps, Waste Water Pumps  
Comments (0)

Grundfos RC

Posted by on Friday, 22 May, 2015

 Grundfos RC pumps are used for the circulation of liquid refrigerants in refrigeration systems.

The RC pumps have been designed and optimised for use with CO2 as a refrigerant, but can also be used with NH3 (Ammonia) and selected HFCs.

 

 

 

 

 

 

The low required NPSH and the fact that no traditional loss-generating protective devices are needed can help system designers to reduce the dimensions and cost of the system. The RC pumps have an innovative design in stainless steel which makes specially suited for use with high pressure refrigerants (CO2) – the pump has only one seal between the refrigerant and ambient sides. A version with welded connections eliminates the use of counter flanges and possible leakage in flange connections.

Applications

Grundfos RC pumps are designed for the circulation of liquid refrigerant in refrigeration systems.

Features and benefits

  • Barrel-type, semi-hermetic, high-pressure design
  • Multistage centrifugal pump
  • Canned motor (no shaft seals)
  • High energy efficiency
  • Wide range for variable speed capacity control
  • Low NPSHR and robust to vapour bubbles in inlet
  • Installation and service friendly
  • Compact and low weight.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Category: Grundfos Circulator Pumps, Grundfos Pumps, Waste Water Pumps, Waste Water Pumps, Water Treatmnet Pumps  
Comments (0)