The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC has now the dual outlet option which makes installation more flexible and replacement even easier than before. Connect vertically or horizontally – as you like.
The Unilift CC can pump down to a water level of 3 mm above the floor when removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. It is fitted with a non-return valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to ¾ ”, 1” or 1 ¼ ” outlets.
The Unilift CC range comprises three single-stage submersible pumps: The CC 5, the CC 7 and the CC 9. The pumps are equally suitable for portable usage and permanent installation.
The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.
The Multibox is the perfect solution for use as an emergency kit for single family houses in the event of flooding. It contains
- Unilift CC-7 with Storz coupling
- 15m Storz fabric hose
- Box with perforated mesh sides as pre-strainer for the pump
Applications
The pumps are designed for pumping rainwater or grey wastewater from:
- Washing machines, bath tubs, showers, sinks, etc.
- Cellars or buildings prone to flooding
- Draining wells
- Collecting wells for surface water with inlets from roof gutters, tunnels, etc.
- Swimming pools, ponds or fountains
The Unilift CC pumps are suitable for the following liquids:
- Clean, non-aggressive water
- Slightly dirty (grey) wastewater
- EN 1.4401 version available for slightly aggressive liquids
Features and benefits
- Horizontal or vertical outlet for easy installation or replacement
- Suitable for low suction levels down to 3mm
- Light-weight
- EN 1.4401 version available for slightly aggressive liquids
- Stainless steel strainer
- Composite materials
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.
Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.
The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.
Applications
The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.
Features and benefits
- Cable plug connection
- Efficient grinder system
- SmartTrim impeller adjustment
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.
The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. There are eleven flow sizes, capable of producing up to almost 50 bar of pressure, and with a variety of shaft seals, rubber materials and supply voltages.
Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimised for their purpose and designed for specific requirements.
Applications
CR pumps provide a complete range of pump solutions so that all applications, industrial and domestic, can benefit from the Grundfos touch. The applications that can be covered include the following:
- Process water systems
- Washing and cleaning systems
- Seawater systems
- Pumping of acids and alkalis
- Ultrafiltration systems
- Reverse osmosis systems
- Swimming baths.
Features and benefits
- Reliability
- High efficiency
- Service-friendly
- Space-saving
- Suitable for slightly aggressive liquids
- High corrosion resistance
- Single-pump solution making high pressures possible.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
Oxiperm® C 166
In addition to cutting-edge sensor technology, these liquid/gas systems also feature a precision programmable controlller with interactive graphic display. Depending on the application, OXIPERM OCG-166 allows you to select from 6 capacity levels of dosing quantities up tp 10 kg/h.
- Generation capacities up to 10 kg/h
-
Safety design with PLC control
- Basic versions with limit value control
- High-tech versions with current control and interactive display of flowsheets,consumption and fault location
Especially for the desinfection of:
The SPO submersible pumps are specially designed for domestic water supply applications.
Available in two basic versions, the SPO can be installed either submersed or dry, depending on individual requirements.
The SPO pumps are made entirely of non-corrosive materials.
All hydraulic parts, including impellers and hydraulic chambers, are made from high-grade stainless steel, DIN W.-Nr.1.4301 (AISI 304).
Applications
The SPO pump is designed for water supply and pressure boosting in private homes and weekend cottages.
The wide product range covers all possible installations in applications such as the following:
- Traditional 5″ or 6″ wells
- Shallow wells
- Rainwater collection in tanks
- Boosting of public water and
- Emptying of garden ponds
- Irrigation of private gardens.
Features and benefits
- Robust and versatile
- Flow up to 6.5 m³/h at a max. pressure of 75 m
- Submersed or dry installation
- Made entirely from non-corrosive materials
- Stainless steel hydraulic parts
- Double mechanical shaft seal
- Plug and pump
- Available with float switch
- Easy to install.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.
The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range. High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.
Applications
Grundfos HS horizontal split case pumps are typically used in these applications:
- Air-conditioning/heating systems
- Public water supply
- District cooling/heating plants
- Cooling systems
- Public waterworks
- Process cooling
- Irrigation.
Features and benefits
- Easy to service: split case design
- Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
- Double volute reduces radial forces and minimises noise and vibration
- Independent bearing housing design allows access to the pump components without removing the top half of the casing
- High energy efficiency
- Low life-cycle costs
- Many product variants available.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos DW pumps are robust, portable submersible pumps with a vertical discharge port.
Available with motors from 0.8 to 20 kW, they are designed to handle dewatering at construction sites, at excavation sites, in building drainage and in similar applications where there is a need to pump raw water or/and at high pressure.
DW main parts are made of aluminium in order for them to be as light as possible. This factor, in combination with the compact design and the high-pressure capabilities, make DW pumps portable and easy to handle. The semi-open type impeller is made of high-chrome stainless steel (550HB) in order to increase wear resistance. DW.50.08 (only) has a polypropylene motor housing.
Applications
DW pumps are excellent for dewatering and draining jobs. The portable design, wear resistant parts and high pressure capabilities ensure the reliability, sustained performance, user-friendliness and ease of servicing that are necessary in demanding dewatering applications at sites such as:
- Construction sites
- Excavations
- Tunnels
- Steel works
- Fish ponds
- Underground parking drainage Industrial drainage pits.
Features and benefits
- Durability
- Portability
- User-friendliness
- Ease of servicing High pressure capabilities Control options.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
