Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.
The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.
The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.
Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.
Applications
The pumps are suitable for:
- Drainage
- Effluent
- Wastewater not containing discharge from toilets.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings
- Short rotor shaft.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The APG pumps are submersible pumps with a horizontal discharge port. They are specifically designed for the pressurised pumping of sewage and wastewater containing destructible solids. The pumps are equipped with a cutter system which cuts destructible solids into small pieces so that they can be led away through pipes of a relatively small diameter. The pumps are available with or without control box and level switch. Pumps without control box must be connected to a separate pump controller with motor starter.
Applications
The compact design makes these pumps suitable for both temporary and permanent installation. They are suitable for both free-standing installation and installation by means of an auto-coupling guide rail system. The APG pumps are designed for pumping:
- Sewage
- Wastewater
- Wastewater with high content of fibrous material
Features and benefits
- Integrated cutting system (APG)
- Dry or submerged installation
- Installation on auto coupling
- Sensors in windings
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.
The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range. High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.
Applications
Grundfos HS horizontal split case pumps are typically used in these applications:
- Air-conditioning/heating systems
- Public water supply
- District cooling/heating plants
- Cooling systems
- Public waterworks
- Process cooling
- Irrigation.
Features and benefits
- Easy to service: split case design
- Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
- Double volute reduces radial forces and minimises noise and vibration
- Independent bearing housing design allows access to the pump components without removing the top half of the casing
- High energy efficiency
- Low life-cycle costs
- Many product variants available.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.
The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.
The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.
Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.
Applications
The pumps are suitable for:
- Drainage
- Effluent
- Wastewater not containing discharge from toilets.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings
- Short rotor shaft.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
Solusi Ampuh Memerangi Bakteri
Sebagai produsen pompa terbesar di dunia. Grundfos selalu mengutamakan penyediaan solusi tidak hanya yang berfokus pada kinerja pompa yang lebih baik, namun juga memilik nilai tambah yang esensial. Oxiperm Pro merupakan salah satu produk Grundfos yang berorientasi pada keamanan air untuk pemakaian yang mengutamakan higienitas.
Kebutuhan manusia akan air yang bersih dewasa ini semakin tinggi. Baik dalam hal kualitas dan juga cara penyediaannya. Penggunaan air yang bebas hama dan mikroorganisme berbahaya banyak diperlukan di berbagai industri termasuk juga untuk kebutuhan sehar-hari. Kebutuhan air bebas hama saat ini semakin tinggi tuntutannya mengingat lingkungan yang juga semakin banyak tercemar paparan subtansi yang berbahaya.
Untuk kebutuhan ini Grundfos menghadirkan Grundfos Oxiperm Pro. Perangkat paling amouh melawan Legionela dan mikroorganisme berbahaya lainnya. Oxiperm adalah tidak mempengaruhi rasa dan bau air karena tidak menghasilkan kloramin dan holoform yang beracun dalam larutan berbahan dasar klorin.
Oxiperm Pro memiliki kinerja yang mengagumkan, dengan proses yang telah dipatenkan, Oxiperm Pro mampu menghemat asam hidroklorat hingga 67% dibandingkan sistem lainnya di pasaran dengan kapasitas yang sama. Di tambah dengan advanced batch-reaction technology dan pengukuran aliran presisi, Oxiperm Pro lebih sedikit menggunakan bahan kimia dan lebih hemat.
Grundfos Oxiperm Pro telah berhasil dengan baik pada proyek-proyek raksasa dunia, seperti penggunaan Oxiperm Pro untuk menghasilkan air minum bebas bakteri bagi eluruh kebutuhan penumpang pesawat terbang di Bandara International Dusseldorf , Jerman. Juga Oxiperm Pro digunakan pada Munich Exhibition Center – Jerman untuk memasok kebutuhan air konsumsi yang sesuai dengan Drinking Water Ordonance tahun 2001 dan harus mematuhi toleransi bahan kimia dan mikrobiologis yang tercantum di dalamnya.
Keuntungan Menggunakan Oxiperm Pro :
- Penggunaan dan pemasangan yang mudah
- Cocock untuk berbagai penggunaan
- Batch/continuous flow
- Metode paling hemat biaya untuk produksi klorin dioksida ( CIO2 )
- Sedikit konsumsi bahan kimia
- Efek disinfeksi tahan lama
- Tidak mempenagruhi bau atau rasa
- Proses kimia yang lengkap dalam waktu minimal
Untuk informasi produk dan penjelasan lebih lanjut, silahkan menghubungi kami.
PT.Andalan Inti Rekatama – PT.AIR
GRUNDFOS Authorized Dealer & Service Partner
Jl.Radio Dalam Raya No.42B
Jakarta Selatan 12140
Telpon : 62-21-7399809 ( Hunting ) & 62-21- 7207977
Fax : 62-21-7248458
Email : csair@ptair.co.id
Website : http://www.ptair.co.id/
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The SPO submersible pumps are specially designed for domestic water supply applications.
Available in two basic versions, the SPO can be installed either submersed or dry, depending on individual requirements.
The SPO pumps are made entirely of non-corrosive materials.
All hydraulic parts, including impellers and hydraulic chambers, are made from high-grade stainless steel, DIN W.-Nr.1.4301 (AISI 304).
Applications
The SPO pump is designed for water supply and pressure boosting in private homes and weekend cottages.
The wide product range covers all possible installations in applications such as the following:
- Traditional 5″ or 6″ wells
- Shallow wells
- Rainwater collection in tanks
- Boosting of public water and
- Emptying of garden ponds
- Irrigation of private gardens.
Features and benefits
- Robust and versatile
- Flow up to 6.5 m³/h at a max. pressure of 75 m
- Submersed or dry installation
- Made entirely from non-corrosive materials
- Stainless steel hydraulic parts
- Double mechanical shaft seal
- Plug and pump
- Available with float switch
- Easy to install.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.
The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.
All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.
Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.
An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.
Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.
Applications
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Liquids containing fibres from light industry, laundries, etc.
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems
Features and benefits
Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
