S pumps form the backbone of many sewage systems. They are selected for their strength, their durability, and for innovative features such as the SmartTrim impeller clearance adjustment system and the Smart Seal for leakage prevention.

The SmartTrim system used on the S-pumps makes it easy to adjust the factory-set impeller clearance and thus to maintain maximum pump efficiency.

The Grundfos SmartSeal Auto-coupling gasket provides a completely leak-proof connection between the pump and the base unit of the auto-coupling system. The shaft seal is capable of rotating in either direction. When the pumps are installed with separate pipework, sludge sedimentation can be avoided by back-flushing the system at regular intervals.

Applications

The pumps are suitable for the following applications:

• Transfer of unscreened raw sewage
• Transfer of raw water
• Pumping of water containing sludge
• Pumping of industrial effluent.

Features and benefits

• Wide range
• SmartTrim
• Operation with/without cooling jacket
• Submerged or dry installation
• Channel and vortex impellers
• Built-in motor protection
• SmartSeal
• Large free passage
• SuperVortex impeller.

The SPO submersible pumps are specially designed for domestic water supply applications.

Available in two basic versions, the SPO can be installed either submersed or dry, depending on individual requirements.

The SPO pumps are made entirely of non-corrosive materials.
All hydraulic parts, including impellers and hydraulic chambers, are made from high-grade stainless steel, DIN W.-Nr.1.4301 (AISI 304).

Applications

The SPO pump is designed for water supply and pressure boosting in private homes and weekend cottages.

The wide product range covers all possible installations in applications such as the following:

• Traditional 5″ or 6″ wells
• Shallow wells
• Rainwater collection in tanks
• Boosting of public water and
• Emptying of garden ponds
•  Irrigation of private gardens.

Features and benefits

• Robust and versatile
• Flow up to 6.5 m³/h at a max. pressure of 75 m
• Submersed or dry installation
• Made entirely from non-corrosive materials
• Stainless steel hydraulic parts
• Double mechanical shaft seal
• Plug and pump
• Available with float switch
• Easy to install.

Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.

The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.

The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.

Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.

Applications

The pumps are suitable for:

• Drainage
• Effluent
• Wastewater not containing discharge from toilets.

Features and benefits

• Cable plug connection
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings
• Short rotor shaft.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos’ new range of GHP (Grundfos Hygienic self-Priming) pumps takes efficiency and durability to new levels in sanitary processes.

The pumps are based on the well-known HILGE technology and are further optimised to offer reliable operation even under the tough conditions encountered in cleaning processes.

The single-stage self-priming GHP pumps combine the best of the F&B-HYGIA end-suction pumps with the reliable HILGE technology. The result is an optimised pump range that comes with increased efficiency compared to traditional side-channel pumps and can be counted on for long operational life.

One pump – More applications

Due to the robust construction of the new GHP pumps they are able to handle liquids with a high content of air as is the case in CIP return systems.

In effect, this means that the same pump can be used for product conveyance as well as for the cleaning processes. Compared to side-channel pumps, GHP pumps are also less sensitive to handling products containing particles.

Low noise operation

The GHP pumps feature a new, unique hydraulic technology that allows the impeller to be adjusted to accommodate exact duty-point requirements.

This translates into a noise level significantly lower than compared to traditional side-channel pumps.

Specially designed for sanitary applications

The all-stainless steel GHP pumps have been specially designed for trouble-free operation in sanitary processes such as:

•  Cleaning processes (CIP return)
•   Evacuation of tanks and pipes
•   Pumping liquids with a high gas content
•   Pumping liquids in Food and Beverage industries.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

Applications

The Unilift CC is designed for the pumping of the following:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

 Features and benefits

• Composite materials
• Stainless steel strainer
• Self-venting valve in handle
• Available with level switch
• Suitable for low suction levels
• Light-weight.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The AeroJet is a self-aspirating aerator that keeps aerobic treatment processes running and also helps to avoid odour problems in wastewater storage, as anaerobic zones can be eliminated.

AeroJets are a flexible way of providing both mixing and aeration with the same device. AeroJets are easy to install, operate and maintain, as they do not require any blowers, air distribution piping or control valves.

The flexibility of the AeroJet offers distinct advantages for upgrading aeration capacity to meet increased oxygen demands. It can be used either alone or as a supplement to existing aeration equipment.

AeroJets are available in many different sizes to ensure that all needs can be met, no matter what the size and shape of the tank.

Applications

AeroJets are ideal in applications where aeration is needed to enhance biological processes, to avoid odour problems, or to supply oxygen in:

• Municipal or industrial WWTP
• Stabilisation and equalisation tanks
• Fish farms

Or in applications where flexible oxygen supply is essential:

• Refurbishment of treatment plants
• Boosting oxygen supply at peak loads
• Avoiding oxygen depletion in lakes or channels

Features and benefits

• Handles both aeration and mixing
• Self-aspirating aerator – no need for additional air distribution pipes, blowers or valves
• Submerged aerator increases oxygen transfer time
• Submerged installation reduces noise and limits aerosol formation at the tank
• Available as a free-standing unit or with the pump on an auto-coupling
• Can easily be installed or repositioned even while processes are running
• Fit all tanks, regardless of size and shape
• Made completely in stainless steel for strength
• Fed by a submersible wastewater pump of the SL, SE or S types
• Large free passage – no clogging

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos RC pumps are used for the circulation of liquid refrigerants in refrigeration systems.

The RC pumps have been designed and optimised for use with CO₂ as a refrigerant, but can also be used with NH₃ (Ammonia) and selected HFCs.

The low required NPSH and the fact that no traditional loss-generating protective devices are needed can help system designers to reduce the dimensions and cost of the system. The RC pumps have an innovative design in stainless steel which makes specially suited for use with high pressure refrigerants (CO₂) – the pump has only one seal between the refrigerant and ambient sides. A version with welded connections eliminates the use of counter flanges and possible leakage in flange connections.

Applications

Grundfos RC pumps are designed for the circulation of liquid refrigerant in refrigeration systems.

Features and benefits

• Barrel-type, semi-hermetic, high-pressure design
• Multistage centrifugal pump
• Canned motor (no shaft seals)
• High energy efficiency
• Wide range for variable speed capacity control
• Low NPSHR and robust to vapour bubbles in inlet
• Installation and service friendly
• Compact and low weight.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

Applications

The Unilift CC is designed for the pumping of the following:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

Features and benefits

• Composite materials
• Stainless steel strainer
• Self-venting valve in handle
• Available with level switch
• Suitable for low suction levels
• Light-weight.