The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.

The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range.  High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.

Applications

Grundfos HS horizontal split case pumps are typically used in these applications:

• Air-conditioning/heating systems
• Public water supply
• District cooling/heating plants
• Cooling systems
• Public waterworks
• Process cooling
• Irrigation.

Features and benefits

• Easy to service: split case design
• Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
• Double volute reduces radial forces and minimises noise and vibration
• Independent bearing housing design allows access to the pump components without removing the top half of the casing
• High energy efficiency
• Low life-cycle costs
• Many product variants available.

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:

SB

The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.

Features and benefits

•   Flexible selection – Pump + controller
•   Complete control and monitoring
•   Easily accessible controller – for service & replacement

SBA

The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

  Features and benefits

•   Easy selection – one unit
•   Easy installation – one unit
•   Flexible installation – no controller inside the house

All SB and SBA pumps are available in two main variants

•   With integrated suction strainer (1 mm mesh)
•   Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).

All variants are available with or without float switch:

The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

Applications

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

    Features and benefits

• Noiseless operation
• High reliability
• Integrated protection.
• Floating suction strainer The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.

  Additional features of the SBA:

•   Simplicity – all-in-one unit
•   Easy installation – no external control unit
•   Integrated dry-running protection
•   Automatic restart after dry-running
•   Lifting eye

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

For every conceivable pump application in food processing and manufacturing, the full-line Grundfos range gives you better peace of mind and optimal compatibility.

 Grundfos and the Food Industry
– Get a taste for optimum solutions

If you are looking to optimize your food production, Grundfos has the know-how to help you do just that. Our full range of sanitary pump solutions and plant service systems caters to the specific needs of:

• Dairies
• Chocolate and confectionery factories
• Food processing plants

We offer models specifically designed to handle viscous, delicate or temperature-sensitive ingredients – and never compromise on the critical aspect of hygiene.

All Grundfos sanitary pumps are made from surface-treated stainless steel, allowing no contamination to take place. Naturally, all pumps are CIP-compatible to ensure that the cleaning of equipment does not only live up to the very strictest of standards but is also time-saving. The result is maximum uptime – and in turn a more efficient production.

Dairy
Full of life and goodness, milk is synonymous with good health and nutrition. Hygienic pump design and gentle handling keep your fresh mil and dairy products just the way you want them.

Confectionery and Chocolate
A taste of the good life starts with stable temperature control, precise solids handling and process control. Grundfos pumps are robust for reability and easily cleaned for consistent quality.

Processed Foods
When you make something for every taste and need, we have a pump to keep the process moving. Extremely viscous mixtures, crystallines and corrosive or abrasive media, there’s nothing we can’t handle gently.

150 Years of Service
Grundfos is the world’s largest pump manufacturer with pump ranges covering every and of the industrial spectrum. The food industry is no exception. We are certainly no stangers to food production; our expertise and heritage in this quality-driven industry go back 150 years through our Hilge subsidiary.

Quality Products need Quality Pumps
Our pump are installed in food processing plants, confectionery and chocolate factories and dairies around the world. Grundfos pumps are ideal for this kind of work because they are designed specifically to maintain product integrity and consistency, as well as to be CIP and SIP compatible. And then there’s peace of mind : Grundfos pumps are synonymous with reability and are backed by a global network complete with service parthners in more than 50 countries. With Grundfos pumps you really can ensure that your product lives up to your standards-batch after batch.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos offers one of the most extensive product ranges in the market and is a natural partner of choice for products and solutions within the municipal, industrial and building services industries. The product range for dosing and disinfection covers everything from disinfection of drinking water to water treatment in highly matched to both, the applications and the market.

The Grundfos products portfolio can also provide you with innovative solutions in the following business areas : water supply and waste water disposal, chemical and process engineering, food and beverage industry as well as heating and cooling technology.

You Can always rely on Grundfos as a competent partner for all your applications.

• DOSING Pumps :
  

Grundfos offers the wide range os dosing pumps. Our innovative drive concepts with stepper motor technology  ( Digital Dosing ) cover a large-scale performance range with only a few models. In addition, there are many advantages such as low pulsation, smooth continuous dosing, simple to use and universal connections to existing process control systems.

To achieve accurate dosing and high process reliability, Grundfos offers  integrated solutions. Digital Dosing combined with optimal dosing head design and 100% stroke length enables you to smoothly dose degassing liquids, such as sodium hypochlorite and hydrogen peroxide. With an optionally integrated Flow Control or Flow Monitor  system, malfunctions in your dosing process will be detected and displayed.

Furthermore , Auto Flow Adapt or Auto Cal ensure automatic compensation and recalibration during the dosing process, even in case of environmental changes.

• DOSING Stations :

Dosing is precision work and one of the main task in chemical and process engineering as well as in water treatment. Digital Dosing pumps deliver unrivalled and optimum performance in these industries.

As they are easy to install, dosing tank stations are the first choice in terms of the economic efficiency and process optimization when adding liquids as coagulants, disinfectants on neutralising agents to a process in a precise and controlled way.

• DISINFECTION :

Grundfos offers  a variety of disinfection systems to ensure appropriate disinfection for your applications. For sustainable disinfection, our SELCOPERM System generates hypochlorite ( 8 g/l) on-site from salt, water and electricity only and our OXIPERM System offers a wide range of possibilities for production and dosing of chlorine dioxide. For chlorine gas dosing we can offer our VACCUPERM Systems.

• MEASUREMENT & CONTROL :

Control of dosing pumps often requires process control equipment to automatically adjust dosing pump flows to set points. Grundfos also offers measuremnet & control equipment for chlorine , chlorine dioxide , pH, ORP either as loose equipment or as preassembled compact backboard mounted systems. And to complete the measurement & control product range , the Grundfos portfolio also includes hand photometers for calibrating the measurement  Tre& Control devices . ( source : Grundfos Water Treatment )