The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

Applications

The Unilift CC is designed for the pumping of the following:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

Features and benefits

• Composite materials
• Stainless steel strainer
• Self-venting valve in handle
• Available with level switch
• Suitable for low suction levels
• Light-weight.

Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.

The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.

The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor is cooled by the pumped liquid flowing around it.

• Enclosure class: IP 68
• Insulation class: F

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.

Applications

The Grundfos Unilift KP pumps are designed for the pumping of:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

Applications

The Unilift CC is designed for the pumping of the following:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

Features and benefits

• Composite materials
• Stainless steel strainer
• Self-venting valve in handle
• Available with level switch
• Suitable for low suction levels
• Light-weight.

The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.

The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. There are eleven flow sizes, capable of producing up to almost 50 bar of pressure, and with a variety of shaft seals, rubber materials and supply voltages.

Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimised for their purpose and designed for specific requirements.

Applications

CR pumps provide a complete range of pump solutions so that all applications, industrial and domestic, can benefit from the Grundfos touch. The applications that can be covered include the following:

• Process water systems
• Washing and cleaning systems
• Seawater systems
• Pumping of acids and alkalis
• Ultrafiltration systems
• Reverse osmosis systems
• Swimming baths.

Features and benefits

• Reliability
• High efficiency
• Service-friendly
• Space-saving
• Suitable for slightly aggressive liquids
• High corrosion resistance
• Single-pump solution making high pressures possible.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The MAXA/MAXANA ranges comprise single-stage, end-suction stainless steel centrifugal pumps designed for heavy-duty operation in a variety of food and beverage applications, chemical and industrial processes, and wastewater treatment processes.

The main dimensions and characteristics correspond to EN 733 / ISO2858. The MAXA pumps are available in a special version with specifications to hygienic standards. They are CIP/SIP capable and can meet the GMP requirements regarding FDA-approved material (on request).

The main applications are in breweries, the beverage and food industries, and water treatment. However, the MAXA/MAXANA range also meets the requirements of the pharmaceutical industry, surface treatment, the textile industry, etc.

Applications

• Gentle pumping of mash and wort for beer filtration (hot side)
• Liquid transfer in dairies
• Water and wastewater treatment plants
• Liquids with high content of solid particles
• Biofuel applications.

Features and benefits

• Greatest possible flexibility
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404) with electropolished surface
• Gentle liquid handling for sensitive liquids
• Optimised hydraulics
• High efficiency and low energy consumption
• Wide range of motors
• Multiple sealing systems
• Many pump variants
• Shrouded pumps
• Various pipe connection types and sizes
• Two different impeller types
• Robust design for heavy duty operation
• Easy service and maintenance
• ATEX-certified pumps
• Tronic (up to 22kw)
• Flow up to 1200 m³/h