Overview
The Grundfos SQ 3” submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.
The SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times.
Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.
If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.
Applications
SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:
- Ground water supply – private housing, small waterworks, small irrigation systems
- Liquid transfer in tanks
- Pressure boosting
- Environmental applications – remedial pumping or sampling
- Garages and petrol stations.
Features and benefits
- Dry-running protection
- Permanent magnet motor with high efficiency
- Wear resistance from floating impellers
- Protection against upthrust
- High flow velocity
- Soft-starts reduce wear on motor
- Over- and under-voltage protection
- Overload protection
- Over-temperature protection.
Additional features of the SQE
- Variable motor speed controls (with connection to the CU 301)
- Connection to the CU 301 for two-way communication.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.
The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range. High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.
Applications
Grundfos HS horizontal split case pumps are typically used in these applications:
- Air-conditioning/heating systems
- Public water supply
- District cooling/heating plants
- Cooling systems
- Public waterworks
- Process cooling
- Irrigation.
Features and benefits
- Easy to service: split case design
- Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
- Double volute reduces radial forces and minimises noise and vibration
- Independent bearing housing design allows access to the pump components without removing the top half of the casing
- High energy efficiency
- Low life-cycle costs
- Many product variants available.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.
The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range. High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.
Applications
Grundfos HS horizontal split case pumps are typically used in these applications:
- Air-conditioning/heating systems
- Public water supply
- District cooling/heating plants
- Cooling systems
- Public waterworks
- Process cooling
- Irrigation.
Features and benefits
- Easy to service: split case design
- Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
- Double volute reduces radial forces and minimises noise and vibration
- Independent bearing housing design allows access to the pump components without removing the top half of the casing
- High energy efficiency
- Low life-cycle costs
- Many product variants available.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.
DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.
The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.
Pumped liquids
The pumps are suitable for:
- Drainage and surface water
- Groundwater
- Industrial process water without solids or fibres.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.
The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.
The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.
The motor is cooled by the pumped liquid flowing around it.
- Enclosure class: IP 68
- Insulation class: F
The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.
Applications
The Grundfos Unilift KP pumps are designed for the pumping of:
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos range of recirculation pumps is the product of decades of engineering experience. Created to handle large flows with low heads, the SRP models are equally suitable for wastewater treatment plants and flood control.
SRP units come in three main variants – DN 300, 500 or 800 mm, fitted with motors from 0.8 to 24 kW. The units share many features with the AMG and AFG gear-driven mixers and flowmakers, making them instantly familiar to service staff and facilitating easy maintenance.
Recent developments include a triple sealing system for maximum protection of the mechanical shaft seal and a bracket that facilitates very easy installation.
Applications
The pumps are suitable for the following applications:
- Re-circulation of sludge within sewage treatment plants
- Storm water pumping.
Features and benefits
- High efficiency stainless steel propeller
- Electronic leak sensor in gearbox/shaft seal housing
- Wide performance range
- Strong axial gear in slim design for high hydrodynamic efficiency
- Integrated overload and overheat protection
- Good self-cleaning capabilities.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The JP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G 1 or Rp 1. The pump has a built-in ejector with guide vanes for optimum self-priming properties.
JP pumps are available in two material variants.
Material variant A: Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.
Material variant B: Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.
The robust design makes the pump suitable for fixed installation. The custom-built composite handle is fitted lengthwise.
The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance Single-phase motors have a built-in thermal switch and require no additional motor protection Three-phase motors require external motor protection
Applications
Built for a long, trouble-free working life, the small and handy Grundfos jet pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.
When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.
Features and benefits
- Self-priming
- Stable operation even if there is air in the liquid
- Ideal for small water supply systems
- Compact and handy.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
