The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

Applications

The Unilift CC is designed for the pumping of the following:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

Features and benefits

• Composite materials
• Stainless steel strainer
• Self-venting valve in handle
• Available with level switch
• Suitable for low suction levels
• Light-weight.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.

The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.

The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor is cooled by the pumped liquid flowing around it.

• Enclosure class: IP 68
• Insulation class: F

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.

Applications

The Grundfos Unilift KP pumps are designed for the pumping of:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Pressure boosting
• Industrial applications.

Features and benefits

• State-of-the-art hydraulics provide high efficiency and low operating costs
• 100 % stainless steel inside and outside
• Sand resistant
• Resistant to aggressive water
• Motor burnout protection
• Dry-running protection
• Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos NK/NKG pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), irrigation and process industries.
Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.

The pumps are all non-self-priming, single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. The Grundfos NK/NKG range comprises a complete series of long-coupled pumps that comply fully with either EN733 or ISO2858. The pumps are of the back pull-out design, enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. Even the largest pumps can thus be serviced by one person with a crane. The ISO2858 range of pumps are available with a bearing life of 100,000 hours, and can be fitted with double seals. They available in a stainless steel version as an option.

Applications

Grundfos offers a virtually limitless range of long-coupled (NK) end-suction pumps. Their sturdiness and reliability make them ideal for use in demanding environments such as the following:

• District heating plants
• Heating systems for blocks of flats
• Air-conditioning systems
• Cooling systems
• Wash down systems
• Other industrial systems.

Features and benefits

• Optimised hydraulics in housing and impeller = unimpeded liquid flow
• O-ring seal between pump housing and cover = no risk of leakage
• Housing, impeller and wear ring in different materials = improved corrosion resistance, no sticking elements
• Back pull-out design for easy dismantling for service
• Pump is electro-coated to increase corrosion resistance
• Available with IE1, IE2 and IE3  motors
• PN 10/16 and 25 bar
• Temperatures up to 180 °C
• Available in a number of shaft seal and material variants.

The MAXA/MAXANA ranges comprise single-stage, end-suction stainless steel centrifugal pumps designed for heavy-duty operation in a variety of food and beverage applications, chemical and industrial processes, and wastewater treatment processes.

The main dimensions and characteristics correspond to EN 733 / ISO2858
The MAXA pumps are available in a special version with specifications to hygienic standards. They are CIP/SIP capable and can meet the GMP requirements regarding FDA-approved material (on request).

The main applications are in breweries, the beverage and food industries, and water treatment. However, the MAXA/MAXANA range also meets the requirements of the pharmaceutical industry, surface treatment, the textile industry, etc.

Applications

• Gentle pumping of mash and wort for beer filtration (hot side)
• Liquid transfer in dairies
• Water and wastewater treatment plants
• Liquids with high content of solid particles
• Biofuel applications.

Features and benefits

• Greatest possible flexibility
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404) with electropolished surface
• Gentle liquid handling for sensitive liquids
• Optimised hydraulics
• High efficiency and low energy consumption
• Wide range of motors
• Multiple sealing systems
• Many pump variants
• Shrouded pumps
• Various pipe connection types and sizes
• Two different impeller types
• Robust design for heavy duty operation
• Easy service and maintenance
• ATEX-certified pumps
• Tronic (up to 22kw)
• Flow up to 1200 m³/h

Now, food industries can meet their strict hygienic requirements with a robust sanitary pump from Grundfos. The F&B-HYGIA^® pumps are single-stage, end-suction centrifugal pumps specially developed for the food and beverage industries – hence the “F&B” in the name.

These compact units are designed for flexible use, allowing many different businesses to benefit from their reliable performance.

F&B-HYGIA^® pumps are made from AISI 316 stainless steel in a compact design that makes them highly mobile and easy to fit into any system. One of the features that make this compact size possible is the plug-in shaft solution. This also makes service easier.

Applications

• Liquid transfer in breweries and dairies
• Soft-drink mixing
• Syrup and sugar solutions
• Frying oil and blood processing
• Fruit-drink and yeast pumping
• Food processing
• Transfer and circulation pump in water treatment systems and textile treatment systems
• Nearly all kinds of transfer, circulating and process pumping.

Features and benefits

• CIP- and SIP-capable (DIN EN 12462)
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404/1.4435) with electropolished surface
• Gentle liquid handling for sensitive liquids such as fruit juice
• Optimised hydraulics for high efficiency and low energy consumption
• Various motor types
• Shrouded pumps, especially useful for breweries and dairies
• Various pipe connection types and connection sizes
• Robust design for heavy duty operation
• Easy service and maintenance – less downtime
• Trolley-mounted version available
• IE2/IE3 motors
• Modular design concept.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner