Now, food industries can meet their strict hygienic requirements with a robust sanitary pump from Grundfos. The F&B-HYGIA^® pumps are single-stage, end-suction centrifugal pumps specially developed for the food and beverage industries – hence the “F&B” in the name.

These compact units are designed for flexible use, allowing many different businesses to benefit from their reliable performance.

F&B-HYGIA^® pumps are made from AISI 316 stainless steel in a compact design that makes them highly mobile and easy to fit into any system. One of the features that make this compact size possible is the plug-in shaft solution. This also makes service easier.

Applications

• Liquid transfer in breweries and dairies
• Soft-drink mixing
• Syrup and sugar solutions
• Frying oil and blood processing
• Fruit-drink and yeast pumping
• Food processing
• Transfer and circulation pump in water treatment systems and textile treatment systems
• Nearly all kinds of transfer, circulating and process pumping.

Features and benefits

• CIP- and SIP-capable (DIN EN 12462)
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404/1.4435) with electropolished surface
• Gentle liquid handling for sensitive liquids such as fruit juice
• Optimised hydraulics for high efficiency and low energy consumption
• Various motor types
• Shrouded pumps, especially useful for breweries and dairies
• Various pipe connection types and connection sizes
• Robust design for heavy duty operation
• Easy service and maintenance – less downtime
• Trolley-mounted version available
• IE2/IE3 motors
• Modular design concept.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.

The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any pump requirement, handle difficult liquids and the most demanding operating conditions.

International studies* show that by far the most significant long-term energy savings can be made by optimising system design and control. Therefore, Grundfos iSOLUTIONS (intelligent solutions) philosophy takes a holistic view of systems and applications, rather than just supplying pumps. This means you are guaranteed an unparalleled level of service throughout the life cycle of the chosen solution.

Applications Multi-purpose CR pumps can be adapted to applications, ranging from simple domestic installations to heavy-duty industrial settings. These include: process water systems, hygienic washing and cleaning systems, seawater systems, water treatment, pumping of acids and alkalis, boiler feed, and applications involving temperature control with exposure to very high, low or fluctuating temperatures.

Whatever the particular challenges of your installation – for example, limited space, earthquake risk, high altitude or certification issues – the CR range has all bases covered.

Features and benefits

• Quality and reliability built on over four decades of continuous Grundfos testing and refinement
• Corrosion-resistant pump modules that can be combined in multiple ways to meet almost every conceivable requirement.
• Streamlined design to save space
• Grundfos MGE motor with integrated frequency converter to allow multi-speed operation and deliver optimal pump performance
• Special pump solutions to cope with extraordinarily high pressure, temperature extremes and liquids that are very aggressive, abrasive, hazardous, hardening or flammable

The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.

The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.

The HS pump also offers high pump efficiencies throughout the range.  High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.

The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.

The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.

Applications

Grundfos HS horizontal split case pumps are typically used in these applications:

• Air-conditioning/heating systems
• Public water supply
• District cooling/heating plants
• Cooling systems
• Public waterworks
• Process cooling
• Irrigation.

Features and benefits

• Easy to service: split case design
• Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
• Double volute reduces radial forces and minimises noise and vibration
• Independent bearing housing design allows access to the pump components without removing the top half of the casing
• High energy efficiency
• Low life-cycle costs
• Many product variants available.

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

Applications

The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.

Features and benefits

• Cable plug connection
• Efficient grinder system
• SmartTrim impeller adjustment
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:

SB

The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.

Features and benefits

• Flexible selection – Pump + controller
• Complete control and monitoring
• Easily accessible controller – for service & replacement

SBA

The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

Features and benefits

• Easy selection – one unit
• Easy installation – one unit
• Flexible installation – no controller inside the house

All SB and SBA pumps are available in two main variants

• With integrated suction strainer (1 mm mesh)
• Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).

All variants are available with or without float switch:

The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

Applications

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

Features and benefits

• Noiseless operation
• High reliability
• Integrated protection.
• Floating suction strainer
  The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.

Additional features of the SBA:

• Simplicity – all-in-one unit
• Easy installation – no external control unit
• Integrated dry-running protection
• Automatic restart after dry-running
• Lifting eye

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.

All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.

The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.
Applications
The Unilift KP pumps are designed for the pumping of:

• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Lowering groundwater
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos’ new range of GHP (Grundfos Hygienic self-Priming) pumps takes efficiency and durability to new levels in sanitary processes.

The pumps are based on the well-known HILGE technology and are further optimised to offer reliable operation even under the tough conditions encountered in cleaning processes.

The single-stage self-priming GHP pumps combine the best of the F&B-HYGIA end-suction pumps with the reliable HILGE technology. The result is an optimised pump range that comes with increased efficiency compared to traditional side-channel pumps and can be counted on for long operational life.

One pump – More applications

Due to the robust construction of the new GHP pumps they are able to handle liquids with a high content of air as is the case in CIP return systems.

In effect, this means that the same pump can be used for product conveyance as well as for the cleaning processes. Compared to side-channel pumps, GHP pumps are also less sensitive to handling products containing particles.

Low noise operation

The GHP pumps feature a new, unique hydraulic technology that allows the impeller to be adjusted to accommodate exact duty-point requirements.

This translates into a noise level significantly lower than compared to traditional side-channel pumps.

Specially designed for sanitary applications

The all-stainless steel GHP pumps have been specially designed for trouble-free operation in sanitary processes such as:

•  Cleaning processes (CIP return)
•   Evacuation of tanks and pipes
•   Pumping liquids with a high gas content
•   Pumping liquids in Food and Beverage industries.