The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.

The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any pump requirement, handle difficult liquids and the most demanding operating conditions.

International studies* show that by far the most significant long-term energy savings can be made by optimising system design and control. Therefore, Grundfos iSOLUTIONS (intelligent solutions) philosophy takes a holistic view of systems and applications, rather than just supplying pumps. This means you are guaranteed an unparalleled level of service throughout the life cycle of the chosen solution.

Applications Multi-purpose CR pumps can be adapted to applications, ranging from simple domestic installations to heavy-duty industrial settings. These include: process water systems, hygienic washing and cleaning systems, seawater systems, water treatment, pumping of acids and alkalis, boiler feed, and applications involving temperature control with exposure to very high, low or fluctuating temperatures.

Whatever the particular challenges of your installation – for example, limited space, earthquake risk, high altitude or certification issues – the CR range has all bases covered.

Features and benefits

• Quality and reliability built on over four decades of continuous Grundfos testing and refinement
• Corrosion-resistant pump modules that can be combined in multiple ways to meet almost every conceivable requirement.
• Streamlined design to save space
• Grundfos MGE motor with integrated frequency converter to allow multi-speed operation and deliver optimal pump performance
• Special pump solutions to cope with extraordinarily high pressure, temperature extremes and liquids that are very aggressive, abrasive, hazardous, hardening or flammable

The Grundfos DMX range has proven its worth in dosing applications worldwide. With their robust diaphragm-based design and their high-quality motors DMX pumps require minimum maintenance and are best choice for many dosing applications. The DMX range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes, materials and accessories.

Accurate dosing – all the time

The diaphragm design ensures that the dosing flow variation is below ± 1.5 % and the linearity deviation is kept below 4 % at all times. This allows very precise dosing of your chemicals – as much as necessary, as little as possible.

Smooth and low-pulsation dosing

The DMX series combines sophisticated drive technolo­gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs

For applications with specific motor requirements, the versatile DMX range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Perfect material selection – for housing and liquid-wetted parts

The smaller DMX models have plastic housings offering chemical resistance and all the protec­tion necessary for many applications. The larger models have a robust cast-aluminium housing with epoxy coating to meet all application needs. Investment costs and running costs for spare parts are kept low over the years: A wide choice of materials for dosing head, valves and accessories allow selecting exactly the degree of chemical resistance required. All liquid-wetted parts need to be resistant to the chemicals used. The diaphragm is made of NBR and PTFE-coated.

Compact design – saves money and space

DMX pumps are available in 12 different dosing head sizes. Careful design work has kept them all very compact. This saves material costs and allows placing several pumps right next to each other in confined spaces. Double-head versions (DMX models 226 and 227) offer a very cost-efficient way to save space or to dose two different chemicals. The extra capacity offered by double-head versions can also be used to gain higher flow rates for a single chemical.

Accessories ensure perfect operation of the entire system

A wide range of accessories specially designed for the DMX series help optimise performance: AR control electronics (contact signal control with multiplier and divisor function, 4-20 mA control or stroke frequency control via display and key pad, low-level/empty signal), integrated relief valve, dosing controller, diaphragm leakage detection, servomotor for automatic stroke length adjustment, PTC motors with Variable Frequency Drive (VFD). We also offer system components such as pressure loading valves and pulsation dampers.

Applications

Disinfection, coagulation, flocculation, precipitation, etc. in:

• Drinking water treatment
• Waste water treatment
• Pulp and paper industry
• Textile industry
• Cleaning water treatment
• Food & Beverage industry, dairies
• Cooling tower water treatment
• Low-pressure boiler feed water treatment

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Liquids containing fibres from light industry, laundries, etc.
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems

Features and benefits

Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

Applications

The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.

Features and benefits

• Cable plug connection
• Efficient grinder system
• SmartTrim impeller adjustment
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:

SB

The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.

Features and benefits

• Flexible selection – Pump + controller
• Complete control and monitoring
• Easily accessible controller – for service & replacement

SBA

The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

Features and benefits

• Easy selection – one unit
• Easy installation – one unit
• Flexible installation – no controller inside the house

All SB and SBA pumps are available in two main variants

• With integrated suction strainer (1 mm mesh)
• Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).

All variants are available with or without float switch:

The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

Applications

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

Features and benefits

• Noiseless operation
• High reliability
• Integrated protection.
• Floating suction strainer
  The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.

Additional features of the SBA:

• Simplicity – all-in-one unit
• Easy installation – no external control unit
• Integrated dry-running protection
• Automatic restart after dry-running
• Lifting eye

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Irrigation starts with sourcing water for the crop from groundwater or surface water from a channel or storage pond. Pumps used at the water intake need to meet changing conditions above and below ground, which have an effect on the pressure and flow required from day to day and from season to season.

A pumping system must be able to deliver the right amount of pressure and flow at the nozzle. Traditionally, water has been distributed from the water source at low or constant pressure from pumps operating atsingle speed, where the simple solution is to oversize the pump. However, this is wasteful – of energy, water, and the of the farmer’s investment.

Grundfos can supply variable speed pumps that are able to adjust its head and flow to compensate for changes in water levels, reducing energy bills. If filtration is required at the water intake, intelligent pump controls ensure that reduced pressure at the nozzle does not happen over time.

Dedicated to modern agricultural irrigation

Grundfos can supply irrigation pumping solutions that reduce energy costs, safeguards the water resource, and keeps productivity at its best. Our pumping expertise and technology ensure uniform coverage despite changeable conditions. Grundfos offers the industry’s broadest line of irrigation pumping systems. Our pumping systems are efficient, tested for reliability and designed to work seamlessly with modern farming operations.

No matter how big or small the application, Grundfos can supply the necessary pressure and flow for modern agricultural irrigation. Variable speed pumps and easily integrated controllers automatically react to changing conditions and demands to keep running costs down. Each component in the system is pre-engineered to work seamlessly with the next.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos RC pumps are used for the circulation of liquid refrigerants in refrigeration systems.

The RC pumps have been designed and optimised for use with CO₂ as a refrigerant, but can also be used with NH₃ (Ammonia) and selected HFCs.

The low required NPSH and the fact that no traditional loss-generating protective devices are needed can help system designers to reduce the dimensions and cost of the system. The RC pumps have an innovative design in stainless steel which makes specially suited for use with high pressure refrigerants (CO₂) – the pump has only one seal between the refrigerant and ambient sides. A version with welded connections eliminates the use of counter flanges and possible leakage in flange connections.

Applications

Grundfos RC pumps are designed for the circulation of liquid refrigerant in refrigeration systems.

Features and benefits

• Barrel-type, semi-hermetic, high-pressure design
• Multistage centrifugal pump
• Canned motor (no shaft seals)
• High energy efficiency
• Wide range for variable speed capacity control
• Low NPSHR and robust to vapour bubbles in inlet
• Installation and service friendly
• Compact and low weight.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner