Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.

All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.

The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.

Applications

The Unilift KP pumps are designed for the pumping of:

• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Lowering groundwater
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.

The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.

The HS pump also offers high pump efficiencies throughout the range.  High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.

The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.

The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.

Applications

Grundfos HS horizontal split case pumps are typically used in these applications:

• Air-conditioning/heating systems
• Public water supply
• District cooling/heating plants
• Cooling systems
• Public waterworks
• Process cooling
• Irrigation.

Features and benefits

• Easy to service: split case design
• Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
• Double volute reduces radial forces and minimises noise and vibration
• Independent bearing housing design allows access to the pump components without removing the top half of the casing
• High energy efficiency
• Low life-cycle costs
• Many product variants available.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.

The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any pump requirement, handle difficult liquids and the most demanding operating conditions.

International studies* show that by far the most significant long-term energy savings can be made by optimising system design and control. Therefore, Grundfos iSOLUTIONS (intelligent solutions) philosophy takes a holistic view of systems and applications, rather than just supplying pumps. This means you are guaranteed an unparalleled level of service throughout the life cycle of the chosen solution.

Applications Multi-purpose CR pumps can be adapted to applications, ranging from simple domestic installations to heavy-duty industrial settings. These include: process water systems, hygienic washing and cleaning systems, seawater systems, water treatment, pumping of acids and alkalis, boiler feed, and applications involving temperature control with exposure to very high, low or fluctuating temperatures.

Whatever the particular challenges of your installation – for example, limited space, earthquake risk, high altitude or certification issues – the CR range has all bases covered.

Features and benefits

• Quality and reliability built on over four decades of continuous Grundfos testing and refinement
• Corrosion-resistant pump modules that can be combined in multiple ways to meet almost every conceivable requirement.
• Streamlined design to save space
• Grundfos MGE motor with integrated frequency converter to allow multi-speed operation and deliver optimal pump performance
• Special pump solutions to cope with extraordinarily high pressure, temperature extremes and liquids that are very aggressive, abrasive, hazardous, hardening or flammable

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Liquids containing fibres from light industry, laundries, etc.
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems

Features and benefits

Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Water distribution is about delivering water to the crop using various techniques, such as pivots, sprinkler irrigation or drip/micro spray applications.

Maintaining correct pressure and flow in the pipes and at the nozzle means more water per kWh and savings on energy, which is one ofthe highest cost items in farming. Pump control also safeguard the reliable flow of water by protecting the pump from dry-running, motor breakdown or power supply irregularities.

Dedicated to modern agricultural irrigation

Grundfos can supply irrigation pumping solutions that reduce energy costs, safeguards the water resource, and keeps productivity at its best. Our pumping expertise and technology ensure uniform coverage despite changeable conditions. Grundfos offers the industry’s broadest line of irrigation pumping systems. Our pumping systems are efficient, tested for reliability and designed to work seamlessly with modern farming operations.

No matter how big or small the application, Grundfos can supply the necessary pressure and flow for modern agricultural irrigation. Variable speed pumps and easily integrated controllers automatically react to changing conditions and demands to keep running costs down. Each component in the system is pre-engineered to work seamlessly with the next.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner