The  SPO submersible pump are specially designed for domestic water supply applications.

Available in two basic versions, the SPO can be installed either submersed or dry, depending on individual requirements.

The SPO pumps are made entirely of non-corrosive materials.
All hydraulic parts, including impellers and hydraulic chambers, are made from high-grade stainless steel, DIN W.-Nr.1.4301 (AISI 304).

Applications

The SPO pump is designed for water supply and pressure boosting in private homes and weekend cottages.

The wide product range covers all possible installations in applications such as the following:

• Traditional 5″ or 6″ wells
• Shallow wells
• Rainwater collection in tanks
• Boosting of public water and
• Emptying of garden ponds
•  Irrigation of private gardens.

Features and benefits

• Robust and versatile
• Flow up to 6.5 m³/h at a max. pressure of 75 m
• Submersed or dry installation
• Made entirely from non-corrosive materials
• Stainless steel hydraulic parts
• Double mechanical shaft seal
• Plug and pump
• Available with float switch
• Easy to install.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The RainJet is a hydroejector designed to automatically clean tanks used for the temporary storage of stormwater or wastewater so that odour problems are avoided and storage capacity is maintained.

The RainJet continues flushing until the tank is completely empty and all the contents have been pumped into the sewer system. It uses the water already in the tank and hence does not need an external source of fresh water.

The RainJet is made either as a water/water (WW) or water/air (WA) ejector:

• RainJet WW with greater flow for cleaning wider tanks
• RainJet WA with jet that reaches further and is mixed with air.

The RainJet is made entirely of stainless steel of AISI 304/DIN1.4301 or AISI 316/DIN 1.4401, and is coupled to a wastewater pump of the SE or S type.

Applications

No matter what the size and layout, a customised solution of one or more RainJets can easily be designed to clean detention, equalisation or stormwater tanks used for the storage of excess water in order to minimise the risks of:

• Flooding or pollution of receiving waters if capacity of the sewer system is exceeded
• Damage of biological processes at the WWTP if untreated industrial process water arrives
• Disruption of purification processes at the WWTP due to hydraulic overload.

Features and benefits

• Available as water/water or water/air ejectors
• RainJet WA available with a 2nd stage for extra thrust
• Made completely in stainless steel for strength
• Available with standard pumps in many motor sizes
• Fitted with sturdy submersible wastewater pump of the SE or S type
• Suits tanks of different sizes, depths and shapes
• Mixing and cleaning handled by same the unit
• Large free passage – no clogging
• Fixed or auto-coupling connections suiting every type of installation
• Pumps on auto-coupling to make maintenance easier and more flexible.

Grundfos TP and TPE vertical in-line volute pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.

Two different models of vertical in-line volute pumps are available. Please note that there are a number of specific product variants available for each model. Detailed information on these variants can be found in Grundfos WebCAPS.

TP pump

This pump model is notable for its high levels of reliability and efficiency.  Quiet, highly-efficient IE3 motors are standard components. All TP pumps are electro-coated to ensure high corrosion resistance.

TPE pump

The main difference between TP and TPE pumps is the motor. TPE motors have a built-in frequency converter, allowing different control methods to be employed. TPE pumps offer benefits with respect to energy savings and increased comfort.

Applications

These vertical in-line volute pumps are used in commercial buildings for air conditioning and heating applications.

The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.

Features and benefits

• Optimised hydraulics for high efficiency

• Reduced power consumption

• High-efficiency motors

• TP pumps are fitted with high-efficiency motors
• High-efficiency motors provide reduced energy consumption
• 2-pole and 4-pole TP pumps from 0.75 kW to 375 kW have IE3 motors (By March 2012)

• Top-pull-out design

• Easy dismantling for service

• In-line design

• Unlike end-suction pumps, in-line pumps allow the use of straight pipework, which often results in reductions in installation cost and amount of space occupied

• Hydraulically and mechanically balanced impeller (Series 300 and 400)

• The impeller is hydraulically and mechanically balanced to increase the life of motor bearings and shaft seals

• Pump housing and pump head/motor stool are electro-coated

• Improved corrosion resistance

• TPE, TPED – pumps with built-in frequency converter

• Reduced power consumption

• TPE and TPED motors are based on IE3 motors (except 18.5, 4-pole).

Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Pressure boosting

• Industrial applications.

Features and benefits

• State-of-the-art hydraulics provide high efficiency and low operating costs
• 100 % stainless steel inside and outside
• Sand resistant
• Resistant to aggressive water
• Motor burnout protection
• Dry-running protection
• Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

DWK and DPK are submersible pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

Applications

DWK/DPK are excellent pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for temporary or fixed installation. The installation design options provide the flexibility needed to cover many needs. Applications include:

• Construction sites
• Excavations
• Tunnels
• Fish ponds
• Drainage pits.

Features and benefits

• Durability
• High efficiency
• Installation flexibility
• High-pressure capabilities, cost-effectiveness.

General

The Grundfos DMX range has proven its worth in dosing applications worldwide. With their robust diaphragm-based design and their high-quality motors DMX pumps require minimum maintenance and are best choice for many dosing applications. The DMX range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes, materials and accessories.

Accurate dosing – all the time

The diaphragm design ensures that the dosing flow variation is below ± 1.5 % and the linearity deviation is kept below 4 % at all times. This allows very precise dosing of your chemicals – as much as necessary, as little as possible.

Smooth and low-pulsation dosing

The DMX series combines sophisticated drive technolo­gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs

For applications with specific motor requirements, the versatile DMX range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Perfect material selection – for housing and liquid-wetted parts

The smaller DMX models have plastic housings offering chemical resistance and all the protec­tion necessary for many applications. The larger models have a robust cast-aluminium housing with epoxy coating to meet all application needs. Investment costs and running costs for spare parts are kept low over the years: A wide choice of materials for dosing head, valves and accessories allow selecting exactly the degree of chemical resistance required. All liquid-wetted parts need to be resistant to the chemicals used. The diaphragm is made of NBR and PTFE-coated.

Compact design – saves money and space

DMX pumps are available in 12 different dosing head sizes. Careful design work has kept them all very compact. This saves material costs and allows placing several pumps right next to each other in confined spaces. Double-head versions (DMX models 226 and 227) offer a very cost-efficient way to save space or to dose two different chemicals. The extra capacity offered by double-head versions can also be used to gain higher flow rates for a single chemical.

Accessories ensure perfect operation of the entire system

A wide range of accessories specially designed for the DMX series help optimise performance: AR control electronics (contact signal control with multiplier and divisor function, 4-20 mA control or stroke frequency control via display and key pad, low-level/empty signal), integrated relief valve, dosing controller, diaphragm leakage detection, servomotor for automatic stroke length adjustment, PTC motors with Variable Frequency Drive (VFD). We also offer system components such as pressure loading valves and pulsation dampers.

Applications

Disinfection, coagulation, flocculation, precipitation, etc. in:

• Drinking water treatment
• Waste water treatment
• Pulp and paper industry
• Textile industry
• Cleaning water treatment
• Food & Beverage industry, dairies
• Cooling tower water treatment
• Low-pressure boiler feed water treatment

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner