The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.

DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.

The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.

Pumped liquids

The pumps are suitable for:

• Drainage and surface water
• Groundwater
• Industrial process water without solids or fibres.

Features and benefits

• Cable plug connection
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Grundfos DMX range has proven its worth in dosing applications worldwide. With their robust diaphragm-based design and their high-quality motors DMX pumps require minimum maintenance and are best choice for many dosing applications. The DMX range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes,materials and accessories.

Accurate dosing – all the time

The diaphragm design ensures that the dosing flow variation is below ± 1.5 % and the linearity deviation is kept below 4 % at all times. This allows very precise dosing of your chemicals – as much as necessary, as little as possible.

Smooth and low-pulsation dosing

The DMX series combines sophisticated drive technolo­gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs

For applications with specific motor requirements, the versatile DMX range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Perfect material selection – for housing and liquid-wetted parts

The smaller DMX models have plastic housings offering chemical resistance and all the protec­tion necessary for many applications. The larger models have a robust cast-aluminium housing with epoxy coating to meet all application needs. Investment costs and running costs for spare parts are kept low over the years: A wide choice of materials for dosing head, valves and accessories allow selecting exactly the degree of chemical resistance required. All liquid-wetted parts need to be resistant to the chemicals used. The diaphragm is made of NBR and PTFE-coated.

Compact design – saves money and space

DMX pumps are available in 12 different dosing head sizes. Careful design work has kept them all very compact. This saves material costs and allows placing several pumps right next to each other in confined spaces. Double-head versions (DMX models 226 and 227) offer a very cost-efficient way to save space or to dose two different chemicals. The extra capacity offered by double-head versions can also be used to gain higher flow rates for a single chemical.

Accessories ensure perfect operation of the entire system

A wide range of accessories specially designed for the DMX series help optimise performance: AR control electronics (contact signal control with multiplier and divisor function, 4-20 mA control or stroke frequency control via display and key pad, low-level/empty signal), integrated relief valve, dosing controller, diaphragm leakage detection, servomotor for automatic stroke length adjustment, PTC motors with Variable Frequency Drive (VFD). We also offer system components such as pressure loading valves and pulsation dampers.

Applications

Disinfection, coagulation, flocculation, precipitation, etc. in:

• Drinking water treatment
• Waste water treatment
• Pulp and paper industry
• Textile industry
• Cleaning water treatment
• Food & Beverage industry, dairies
• Cooling tower water treatment
• Low-pressure boiler feed water treatment

The KPL axial-flow propeller pump is designed for high flow at low head.

With a flow capacity of up to 700 m³/min at a head of up to 9 m, the Grundfos KPL axial-flow propeller pump is ideal for flood control as well as other applications where large volumes of water are to be moved.

Each KPL pump is individually engineered to suit your requirements, ensuring cost-efficient performance. For optimum results, contact Grundfos during your planning stages; that allows us to consider aspects such as pumping station design, pump selection, future requirements, and the total life cycle costs.

Applications

Built to handle large quantities of raw water, the pumps are ideal for a wide range of applications such as

• flood and storm water control
• large-volume drainage and irrigation
• raw-water intake
• circulation of large quantities of water, e.g. in water parks
• water-level control in coastal and low-lying areas
• filling and emptying of dry docks and harbour installations
• filling or emptying of reservoirs
• treated sewage
• cooling-water intake in power stations
• process and discharge water
• other low- to medium-head/high-flow applications.

Features and benefits

Reliability meets excellent value

• Quality products
• robust, reliable and cost-effective
• maximum value for money.

Minimum, easy service

• Simple pump design ensures lasting, trouble-free operation
• All pumps are individually tested and registered; as a result, the right spare parts can be supplied very efficiently, even after many years.

Wide choice

• All models available in cast iron or stainless steel
• 50 or 60 Hz
• special materials such as propeller in aluminium bronze as standard and stainless steel available on request
• high-voltage models available, up to 10 kV on special request)
• pump and motor size up to 1 MW on special request.

Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Read more about the SP system and related products here

Applications

The pumps are suitable for:

• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Pressure boosting
• Industrial applications.

Features and benefits

• State-of-the-art hydraulics provide high efficiency and low operating costs
• 100 % stainless steel inside and outside
• Sand resistant
• Resistant to aggressive water
• Motor burnout protection
• Dry-running protection
• Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Liquids containing fibres from light industry, laundries, etc.
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems

Features and benefits

Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.

The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any pump requirement, handle difficult liquids and the most demanding operating conditions.

International studies* show that by far the most significant long-term energy savings can be made by optimising system design and control. Therefore, Grundfos iSOLUTIONS (intelligent solutions) philosophy takes a holistic view of systems and applications, rather than just supplying pumps. This means you are guaranteed an unparalleled level of service throughout the life cycle of the chosen solution.

Applications
Multi-purpose CR pumps can be adapted to applications, ranging from simple domestic installations to heavy-duty industrial settings. These include: process water systems, hygienic washing and cleaning systems, seawater systems, water treatment, pumping of acids and alkalis, boiler feed, and applications involving temperature control with exposure to very high, low or fluctuating temperatures.

Whatever the particular challenges of your installation – for example, limited space, earthquake risk, high altitude or certification issues – the CR range has all bases covered.

Features and benefits

• Quality and reliability built on over four decades of continuous Grundfos testing and refinement
• Corrosion-resistant pump modules that can be combined in multiple ways to meet almost every conceivable requirement.
• Streamlined design to save space
• Grundfos MGE motor with integrated frequency converter to allow multi-speed operation and deliver optimal pump performance
• Special pump solutions to cope with extraordinarily high pressure, temperature extremes and liquids that are very aggressive, abrasive, hazardous, hardening or flammable

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump