The Grundfos SQ 3” submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.

The SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times

Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.

If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.

Applications

SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:

• Ground water supply – private housing, small waterworks, small irrigation systems
• Liquid transfer in tanks
• Pressure boosting
• Environmental applications – remedial pumping or sampling
• Garages and petrol stations.

Features and benefits

• Dry-running protection
• Permanent magnet motor with high efficiency
• Wear resistance from floating impellers
• Protection against upthrust
• High flow velocity
• Soft-starts reduce wear on motor
• Over- and under-voltage protection
• Overload protection
• Over-temperature protection.

Additional features of the SQE

• Variable motor speed controls (with connection to the CU 301)
• Connection to the CU 301 for two-way communication.

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

Applications

The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.

Features and benefits

• Cable plug connection
• Efficient grinder system
• SmartTrim impeller adjustment
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Liquids containing fibres from light industry, laundries, etc.
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems

Features and benefits

Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The durietta 0 is a close-coupled, end-suction, single-stage or multistage centrifugal pump suitable for all kinds of low-flow, high-head applications requiring sanitary pumping equipment. The pump is designed in compliance with food technology requirements, making it ideal for applications where a high level of hygiene is required. It is CIP- and SIP-capable, and in line with the performance characteristics outlined for pumps in DIN 12462.

 
The durietta 0 is made from high-quality stainless steel to ensure reliable, hygienic, non-corrosive operation. Stages, discharge and suction casings, and impellers are manufactured from deep-drawn rolled stainless steel.

Applications

• Liquid transfer in breweries and dairies
• Mixing and soft drink applications
• Food processing plants
• Filtration and bottling systems
• CIP (Cleaning-In-Place) systems
• Process pumping in the chemical industry
• As a transfer and circulation pump in water treatment systems
• Virtually all types of transfer, circulating and process pumping

Features and benefits

• Designed for sanitary applications
• Easy service and maintenance, modular design
• Reliable – less downtime
• High efficiency and low energy consumption
• Compact design
• CIP and SIP capable (DIN EN 12462)
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404) with electropolished surface
• Gentle liquid handling for sensitive liquids
• Optimised hydraulics
• Single and double mechanical seals in tandem
• Shrouded pumps, especially useful for breweries and dairies
• Various pipe connection types and connection sizes
• Designed for low-flow, high-head applications

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

Applications

The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.

Features and benefits

• Cable plug connection
• Efficient grinder system
• SmartTrim impeller adjustment
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings.