Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.

All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.

The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.

Applications

The Unilift KP pumps are designed for the pumping of:

• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Lowering groundwater
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The SPO submersible pumps are specially designed for domestic water supply applications.

Available in two basic versions, the SPO can be installed either submersed or dry, depending on individual requirements.

The SPO pumps are made entirely of non-corrosive materials. All hydraulic parts, including impellers and hydraulic chambers, are made from high-grade stainless steel, DIN W.-Nr.1.4301 (AISI 304).

Applications

The SPO pump is designed for water supply and pressure boosting in private homes and weekend cottages.

The wide product range covers all possible installations in applications such as the following:

• Traditional 5″ or 6″ wells
• Shallow wells
• Rainwater collection in tanks
• Boosting of public water and
• Emptying of garden ponds
•  Irrigation of private gardens.

Features and benefits

• Robust and versatile
• Flow up to 6.5 m³/h at a max. pressure of 75 m
• Submersed or dry installation
• Made entirely from non-corrosive materials
• Stainless steel hydraulic parts
• Double mechanical shaft seal
• Plug and pump
• Available with float switch
• Easy to install

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The SPO submersible pumps are specially designed for domestic water supply applications.

Available in two basic versions, the SPO can be installed either submersed or dry, depending on individual requirements.

The SPO pumps are made entirely of non-corrosive materials.
All hydraulic parts, including impellers and hydraulic chambers, are made from high-grade stainless steel, DIN W.-Nr.1.4301 (AISI 304).

Applications

The SPO pump is designed for water supply and pressure boosting in private homes and weekend cottages.

The wide product range covers all possible installations in applications such as the following:

• Traditional 5″ or 6″ wells
• Shallow wells
• Rainwater collection in tanks
• Boosting of public water and
• Emptying of garden ponds
•  Irrigation of private gardens.

Features and benefits

• Robust and versatile
• Flow up to 6.5 m³/h at a max. pressure of 75 m
• Submersed or dry installation
• Made entirely from non-corrosive materials
• Stainless steel hydraulic parts
• Double mechanical shaft seal
• Plug and pump
• Available with float switch
• Easy to install.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.

The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any pump requirement, handle difficult liquids and the most demanding operating conditions.

International studies* show that by far the most significant long-term energy savings can be made by optimising system design and control. Therefore, Grundfos iSOLUTIONS (intelligent solutions) philosophy takes a holistic view of systems and applications, rather than just supplying pumps. This means you are guaranteed an unparalleled level of service throughout the life cycle of the chosen solution.

Applications
Multi-purpose CR pumps can be adapted to applications, ranging from simple domestic installations to heavy-duty industrial settings. These include: process water systems, hygienic washing and cleaning systems, seawater systems, water treatment, pumping of acids and alkalis, boiler feed, and applications involving temperature control with exposure to very high, low or fluctuating temperatures.

Whatever the particular challenges of your installation – for example, limited space, earthquake risk, high altitude or certification issues – the CR range has all bases covered.

Features and benefits

• Quality and reliability built on over four decades of continuous Grundfos testing and refinement
• Corrosion-resistant pump modules that can be combined in multiple ways to meet almost every conceivable requirement.
• Streamlined design to save space
• Grundfos MGE motor with integrated frequency converter to allow multi-speed operation and deliver optimal pump performance
• Special pump solutions to cope with extraordinarily high pressure, temperature extremes and liquids that are very aggressive, abrasive, hazardous, hardening or flammable

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:

SB

The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.

Features and benefits

• Flexible selection – Pump + controller
• Complete control and monitoring
• Easily accessible controller – for service & replacement

SBA

The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

Features and benefits

• Easy selection – one unit
• Easy installation – one unit
• Flexible installation – no controller inside the house

All SB and SBA pumps are available in two main variants

• With integrated suction strainer (1 mm mesh)
• Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).

All variants are available with or without float switch:

The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

Applications

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

Features and benefits

• Noiseless operation
• High reliability
• Integrated protection.
• Floating suction strainer
  The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.

Additional features of the SBA:

• Simplicity – all-in-one unit
• Easy installation – no external control unit
• Integrated dry-running protection
• Automatic restart after dry-running
• Lifting eye

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The KPL axial-flow propeller pump is designed for high flow at low head.

With a flow capacity of up to 700 m³/min at a head of up to 9 m, the Grundfos KPL axial-flow propeller pump is ideal for flood control as well as other applications where large volumes of water are to be moved.

Each KPL pump is individually engineered to suit your requirements, ensuring cost-efficient performance. For optimum results, contact Grundfos during your planning stages; that allows us to consider aspects such as pumping station design, pump selection, future requirements, and the total life cycle costs.

Applications

Built to handle large quantities of raw water, the pumps are ideal for a wide range of applications such as

• flood and storm water control
• large-volume drainage and irrigation
• raw-water intake
• circulation of large quantities of water, e.g. in water parks
• water-level control in coastal and low-lying areas
• filling and emptying of dry docks and harbour installations
• filling or emptying of reservoirs
• treated sewage
• cooling-water intake in power stations
• process and discharge water
• other low- to medium-head/high-flow applications.

Features and benefits

Reliability meets excellent value

• Quality products
• robust, reliable and cost-effective
• maximum value for money.

Minimum, easy service

• Simple pump design ensures lasting, trouble-free operation
• All pumps are individually tested and registered; as a result, the right spare parts can be supplied very efficiently, even after many years.

Wide choice

• All models available in cast iron or stainless steel
• 50 or 60 Hz
• special materials such as propeller in aluminium bronze as standard and stainless steel available on request
• high-voltage models available, up to 10 kV on special request)
• pump and motor size up to 1 MW on special request.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner