The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:
SB
The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.
Features and benefits
- Flexible selection – Pump + controller
- Complete control and monitoring
- Easily accessible controller – for service & replacement
SBA
The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.
The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.
Features and benefits
- Easy selection – one unit
- Easy installation – one unit
- Flexible installation – no controller inside the house
All SB and SBA pumps are available in two main variants
- With integrated suction strainer (1 mm mesh)
- Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).
All variants are available with or without float switch:
The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.
Applications
The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.
Features and benefits
- Noiseless operation
- High reliability
- Integrated protection.
- Floating suction strainer
The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.
Additional features of the SBA:
- Simplicity – all-in-one unit
- Easy installation – no external control unit
- Integrated dry-running protection
- Automatic restart after dry-running
- Lifting eye
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.
All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.
The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.
The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.
Applications
The Unilift KP pumps are designed for the pumping of:
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Lowering groundwater
- Domestic effluents from septic and sludge-treating systems
- Effluents from viaducts, underpasses, etc.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos’ new range of GHP (Grundfos Hygienic self-Priming) pumps takes efficiency and durability to new levels in sanitary processes.
The pumps are based on the well-known HILGE technology and are further optimised to offer reliable operation even under the tough conditions encountered in cleaning processes.
The single-stage self-priming GHP pumps combine the best of the F&B-HYGIA end-suction pumps with the reliable HILGE technology. The result is an optimised pump range that comes with increased efficiency compared to traditional side-channel pumps and can be counted on for long operational life.
One pump – More applications
Due to the robust construction of the new GHP pumps they are able to handle liquids with a high content of air as is the case in CIP return systems.
In effect, this means that the same pump can be used for product conveyance as well as for the cleaning processes. Compared to side-channel pumps, GHP pumps are also less sensitive to handling products containing particles.
Low noise operation
The GHP pumps feature a new, unique hydraulic technology that allows the impeller to be adjusted to accommodate exact duty-point requirements.
This translates into a noise level significantly lower than compared to traditional side-channel pumps.
Specially designed for sanitary applications
The all-stainless steel GHP pumps have been specially designed for trouble-free operation in sanitary processes such as:
- Cleaning processes (CIP return)
- Evacuation of tanks and pipes
- Pumping liquids with a high gas content
- Pumping liquids in Food and Beverage industries.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.
The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.
The HS pump also offers high pump efficiencies throughout the range. High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.
The HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only.
The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.
Applications
Grundfos HS horizontal split case pumps are typically used in these applications:
- Air-conditioning/heating systems
- Public water supply
- District cooling/heating plants
- Cooling systems
- Public waterworks
- Process cooling
- Irrigation.
Features and benefits
- Easy to service: split case design
- Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
- Double volute reduces radial forces and minimises noise and vibration
- Independent bearing housing design allows access to the pump components without removing the top half of the casing
- High energy efficiency
- Low life-cycle costs
- Many product variants available.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.
The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. There are eleven flow sizes, capable of producing up to almost 50 bar of pressure, and with a variety of shaft seals, rubber materials and supply voltages.
Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimised for their purpose and designed for specific requirements.
Applications
CR pumps provide a complete range of pump solutions so that all applications, industrial and domestic, can benefit from the Grundfos touch. The applications that can be covered include the following:
- Process water systems
- Washing and cleaning systems
- Seawater systems
- Pumping of acids and alkalis
- Ultrafiltration systems
- Reverse osmosis systems
- Swimming baths.
Features and benefits
- Reliability
- High efficiency
- Service-friendly
- Space-saving
- Suitable for slightly aggressive liquids
- High corrosion resistance
- Single-pump solution making high pressures possible
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.
The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.
All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.
Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.
An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.
Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.
Applications
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Liquids containing fibres from light industry, laundries, etc.
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems
Features and benefits
Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.
Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.
The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.
Applications
The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.
Features and benefits
- Cable plug connection
- Efficient grinder system
- SmartTrim impeller adjustment
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.
The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.
The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.
Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.
Applications
The pumps are suitable for:
- Drainage
- Effluent
- Wastewater not containing discharge from toilets.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings
- Short rotor shaft
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.
The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.
The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.
The motor is cooled by the pumped liquid flowing around it.
- Enclosure class: IP 68
- Insulation class: F
The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.
Applications
The Grundfos Unilift KP pumps are designed for the pumping of:
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
