The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.
DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.
The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.
Pumped liquids
The pumps are suitable for:
- Drainage and surface water
- Groundwater
- Industrial process water without solids or fibres.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
S pumps form the backbone of many sewage systems. They are selected for their strength, their durability, and for innovative features such as the SmartTrim impeller clearance adjustment system and the Smart Seal for leakage prevention.
The SmartTrim system used on the S-pumps makes it easy to adjust the factory-set impeller clearance and thus to maintain maximum pump efficiency.
The Grundfos SmartSeal Auto-coupling gasket provides a completely leak-proof connection between the pump and the base unit of the auto-coupling system. The shaft seal is capable of rotating in either direction. When the pumps are installed with separate pipework, sludge sedimentation can be avoided by back-flushing the system at regular intervals.
Applications
The pumps are suitable for the following applications:
- Transfer of unscreened raw sewage
- Transfer of raw water
- Pumping of water containing sludge
- Pumping of industrial effluent.
Features and benefits
- Wide range
- SmartTrim
- Operation with/without cooling jacket
- Submerged or dry installation
- Channel and vortex impellers
- Built-in motor protection
- SmartSeal
- Large free passage
- SuperVortex impeller.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.
The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.
The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.
Applications
The Unilift CC is designed for the pumping of the following:
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems.
Features and benefits
- Composite materials
- Stainless steel strainer
- Self-venting valve in handle
- Available with level switch
- Suitable for low suction levels
- Light-weight.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.
All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.
The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.
The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.
Applications
The Unilift KP pumps are designed for the pumping of:
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Lowering groundwater
- Domestic effluents from septic and sludge-treating systems
- Effluents from viaducts, underpasses, etc.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner LEADER Pump
The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.
The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.
The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.
Applications
The Unilift CC is designed for the pumping of the following:
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems.
Features and benefits
- Composite materials
- Stainless steel strainer
- Self-venting valve in handle
- Available with level switch
- Suitable for low suction levels
- Light-weight.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos’ new range of GHP (Grundfos Hygienic self-Priming) pumps takes efficiency and durability to new levels in sanitary processes.
The pumps are based on the well-known HILGE technology and are further optimised to offer reliable operation even under the tough conditions encountered in cleaning processes.
The single-stage self-priming GHP pumps combine the best of the F&B-HYGIA end-suction pumps with the reliable HILGE technology. The result is an optimised pump range that comes with increased efficiency compared to traditional side-channel pumps and can be counted on for long operational life.
One pump – More applications
Due to the robust construction of the new GHP pumps they are able to handle liquids with a high content of air as is the case in CIP return systems.
In effect, this means that the same pump can be used for product conveyance as well as for the cleaning processes. Compared to side-channel pumps, GHP pumps are also less sensitive to handling products containing particles.
Low noise operation
The GHP pumps feature a new, unique hydraulic technology that allows the impeller to be adjusted to accommodate exact duty-point requirements.
This translates into a noise level significantly lower than compared to traditional side-channel pumps.
Specially designed for sanitary applications
The all-stainless steel GHP pumps have been specially designed for trouble-free operation in sanitary processes such as:
- Cleaning processes (CIP return)
- Evacuation of tanks and pipes
- Pumping liquids with a high gas content
- Pumping liquids in Food and Beverage industries.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.
The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.
The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.
Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.
Applications
The pumps are suitable for:
- Drainage
- Effluent
- Wastewater not containing discharge from toilets.
Features and benefits
- Cable plug connection
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings
- Short rotor shaft.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.
Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.
The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.
Applications
The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.
Features and benefits
- Cable plug connection
- Efficient grinder system
- SmartTrim impeller adjustment
- Unique clamp connection
- Specially designed lifting handle
- Unique cartridge shaft seal
- Modular design
- Heavy-duty ball bearings.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
The Grundfos DW pumps are robust, portable submersible pumps with a vertical discharge port.
Available with motors from 0.8 to 20 kW, they are designed to handle dewatering at construction sites, at excavation sites, in building drainage and in similar applications where there is a need to pump raw water or/and at high pressure.
DW main parts are made of aluminium in order for them to be as light as possible. This factor, in combination with the compact design and the high-pressure capabilities, make DW pumps portable and easy to handle. The semi-open type impeller is made of high-chrome stainless steel (550HB) in order to increase wear resistance. DW.50.08 (only) has a polypropylene motor housing.
Applications
DW pumps are excellent for dewatering and draining jobs. The portable design, wear resistant parts and high pressure capabilities ensure the reliability, sustained performance, user-friendliness and ease of servicing that are necessary in demanding dewatering applications at sites such as:
- Construction sites
- Excavations
- Tunnels
- Steel works
- Fish ponds
- Underground parking drainage Industrial drainage pits.
Features and benefits
- Durability
- Portability
- User-friendliness
- Ease of servicing High pressure capabilities Control options.
PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner
