Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.

The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.

The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor is cooled by the pumped liquid flowing around it.

• Enclosure class: IP 68
• Insulation class: F

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.

Applications

The Grundfos Unilift KP pumps are designed for the pumping of:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Grundfos range of recirculation pumps is the product of decades of engineering experience. Created to handle large flows with low heads, the SRP models are equally suitable for wastewater treatment plants and flood control.

SRP units come in three main variants – DN 300, 500 or 800 mm, fitted with motors from 0.8 to 24 kW. The units  many features with the AMG and AFG gear-driven mixers and flowmakers, making them instantly familiar to service staff and facilitating easy maintenance.

Recent developments include a triple sealing system for maximum protection of the mechanical shaft seal and a bracket that facilitates very easy installation.

Applications

The pumps are suitable for the following applications:

• Re-circulation of sludge within sewage treatment plants
• Storm water pumping.

Features and benefits

• High efficiency stainless steel propeller
• Electronic leak sensor in gearbox/shaft seal housing
• Wide performance range
• Strong axial gear in slim design for high hydrodynamic efficiency
• Integrated overload and overheat protection
• Good self-cleaning capabilities.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Liquids containing fibres from light industry, laundries, etc.
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems

Features and benefits

Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The AeroJet is a self-aspirating aerator that keeps aerobic treatment processes running and also helps to avoid odour problems in wastewater storage, as anaerobic zones can be eliminated.

AeroJets are a flexible way of providing both mixing and aeration with the same device. AeroJets are easy to install, operate and maintain, as they do not require any blowers, air distribution piping or control valves.

The flexibility of the AeroJet offers distinct advantages for upgrading aeration capacity to meet increased oxygen demands. It can be used either alone or as a supplement to existing aeration equipment.

AeroJets are available in many different sizes to ensure that all needs can be met, no matter what the size and shape of the tank.

Applications

AeroJets are ideal in applications where aeration is needed to enhance biological processes, to avoid odour problems, or to supply oxygen in:

• Municipal or industrial WWTP
• Stabilisation and equalisation tanks
• Fish farms

Or in applications where flexible oxygen supply is essential:

• Refurbishment of treatment plants
• Boosting oxygen supply at peak loads
• Avoiding oxygen depletion in lakes or channels

Features and benefits

• Handles both aeration and mixing
• Self-aspirating aerator – no need for additional air distribution pipes, blowers or valves
• Submerged aerator increases oxygen transfer time
• Submerged installation reduces noise and limits aerosol formation at the tank
• Available as a free-standing unit or with the pump on an auto-coupling
• Can easily be installed or repositioned even while processes are running
• Fit all tanks, regardless of size and shape
• Made completely in stainless steel for strength
• Fed by a submersible wastewater pump of the SL, SE or S types
• Large free passage – no clogging

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The durietta 0 is a close-coupled, end-suction, single-stage or multistage centrifugal pump suitable for all kinds of low-flow, high-head applications requiring sanitary pumping equipment. The pump is designed in compliance with food technology requirements, making it ideal for applications where a high level of hygiene is required. It is CIP- and SIP-capable, and in line with the performance characteristics outlined for pumps in DIN 12462.

The durietta 0 is made from high-quality stainless steel to ensure reliable, hygienic, non-corrosive operation. Stages, discharge and suction casings, and impellers are manufactured from deep-drawn rolled stainless steel.

Applications

• Liquid transfer in breweries and dairies
• Mixing and soft drink applications
• Food processing plants
• Filtration and bottling systems
• CIP (Cleaning-In-Place) systems
• Process pumping in the chemical industry
• As a transfer and circulation pump in water treatment systems
• Virtually all types of transfer, circulating and process pumping

Features and benefits

• Designed for sanitary applications
• Easy service and maintenance, modular design
• Reliable – less downtime
• High efficiency and low energy consumption
• Compact design
• CIP and SIP capable (DIN EN 12462)
• Materials: Rolled, deep-drawn steel AISI 316L (1.4404) with electropolished surface
• Gentle liquid handling for sensitive liquids
• Optimised hydraulics
• Single and double mechanical seals in tandem
• Shrouded pumps, especially useful for breweries and dairies
• Various pipe connection types and connection sizes
• Designed for low-flow, high-head applications

Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Pressure boosting
• Industrial applications.

Features and benefits

• State-of-the-art hydraulics provide high efficiency and low operating costs
• 100 % stainless steel inside and outside
• Sand resistant
• Resistant to aggressive water
• Motor burnout protection
• Dry-running protection
• Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner