Archive for category Water Treatmnet Pumps

Grundfos EF

Posted by on Thursday, 14 May, 2015

Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.

The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.

 

grundfos EF

 

 

 

 

 

 

The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.

Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.

Applications

The pumps are suitable for:

  • Drainage
  • Effluent
  • Wastewater not containing discharge from toilets.

 

Features and benefits

  • Cable plug connection
  • Unique clamp connection
  • Specially designed lifting handle
  • Unique cartridge shaft seal
  • Modular design
  • Heavy-duty ball bearings
  • Short rotor shaft.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump


Grundfos SRP

Posted by on Thursday, 14 May, 2015

The Grundfos range of recirculation pumps is the product of decades of engineering experience. Created to handle large flows with low heads, the SRP models are equally suitable for wastewater treatment plants and flood control.

 

 

 

 

 

 

SRP units come in three main variants – DN 300, 500 or 800 mm, fitted with motors from 0.8 to 24 kW. The units share many features with the AMG and AFG gear-driven mixers and flowmakers, making them instantly familiar to service staff and facilitating easy maintenance.

Recent developments include a triple sealing system for maximum protection of the mechanical shaft seal and a bracket that facilitates very easy installation.

Applications

The pumps are suitable for the following applications:

  • Re-circulation of sludge within sewage treatment plants
  • Storm water pumping.

Features and benefits

  • High efficiency stainless steel propeller
  • Electronic leak sensor in gearbox/shaft seal housing
  • Wide performance range
  • Strong axial gear in slim design for high hydrodynamic efficiency
  • Integrated overload and overheat protection
  • Good self-cleaning capabilities.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner


Grundfos SRP

Posted by on Wednesday, 13 May, 2015

The Grundfos range of recirculation pumps is the product of decades of engineering experience. Created to handle large flows with low heads, the SRP models are equally suitable for wastewater treatment plants and flood control.

 

SRP units come in three main variants – DN 300, 500 or 800 mm, fitted with motors from 0.8 to 24 kW. The units share many features with the AMG and AFG gear-driven mixers and flowmakers, making them instantly familiar to service staff and facilitating easy maintenance.

 

 

Recent developments include a triple sealing system for maximum protection of the mechanical shaft seal and a bracket that facilitates very easy installation.

Applications

The pumps are suitable for the following applications:

  • Re-circulation of sludge within sewage treatment plants
  • Storm water pumping.

Features and benefits

  • High efficiency stainless steel propeller
  • Electronic leak sensor in gearbox/shaft seal housing
  • Wide performance range
  • Strong axial gear in slim design for high hydrodynamic efficiency
  • Integrated overload and overheat protection
  • Good self-cleaning capabilities.

 

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner
 

Grundfos Unilift KP

Posted by on Wednesday, 13 May, 2015

Unilift KP pumps are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.

All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.

Grundfos Unilift KP

 

 

 

 

 

 

The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.

Applications

The Unilift KP pumps are designed for the pumping of:

  • Water from rivers and lakes
  • Rainwater, drainage water and water from flooding
  • Water for filling/emptying containers, ponds, tanks, etc.
  • Effluents from showers, washing machines and sinks below sewer level
  • Pool water
  • Ditch drainage water
  • Lowering groundwater
  • Domestic effluents from septic and sludge-treating systems
  • Effluents from viaducts, underpasses, etc.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner


Grundfos Hygienic self-Priming (GHP)

Posted by on Tuesday, 12 May, 2015

Grundfos Hygienic self-Priming

Grundfos’ new range of GHP (Grundfos Hygienic self-Priming) pumps takes efficiency and durability to new levels in sanitary processes.

 

 

 

 

 

 

The pumps are based on the well-known HILGE technology and are further optimised to offer reliable operation even under the tough conditions encountered in cleaning processes.

The single-stage self-priming GHP pumps combine the best of the F&B-HYGIA end-suction pumps with the reliable HILGE technology. The result is an optimised pump range that comes with increased efficiency compared to traditional side-channel pumps and can be counted on for long operational life.

One pump – More applications

Due to the robust construction of the new GHP pumps they are able to handle liquids with a high content of air as is the case in CIP return systems.

In effect, this means that the same pump can be used for product conveyance as well as for the cleaning processes. Compared to side-channel pumps, GHP pumps are also less sensitive to handling products containing particles.

Low noise operation

The GHP pumps feature a new, unique hydraulic technology that allows the impeller to be adjusted to accommodate exact duty-point requirements.

This translates into a noise level significantly lower than compared to traditional side-channel pumps.

Specially designed for sanitary applications

The all-stainless steel GHP pumps have been specially designed for trouble-free operation in sanitary processes such as:

  •  Cleaning processes (CIP return)
  •  Evacuation of tanks and pipes
  •  Pumping liquids with a high gas content
  •  Pumping liquids in Food and Beverage industries.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner


Grundfos CR, CRE, CRN, CRNE, CRI, CRIE, CRT, CRTE

Posted by on Monday, 11 May, 2015

The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.

The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any pump requirement, handle difficult liquids and the most demanding operating conditions.

 

Grundfos CR

 

 

 

 

 

International studies* show that by far the most significant long-term energy savings can be made by optimising system design and control. Therefore, Grundfos iSOLUTIONS (intelligent solutions) philosophy takes a holistic view of systems and applications, rather than just supplying pumps. This means you are guaranteed an unparalleled level of service throughout the life cycle of the chosen solution.


Applications

Multi-purpose CR pumps can be adapted to applications, ranging from simple domestic installations to heavy-duty industrial settings. These include: process water systems, hygienic washing and cleaning systems, seawater systems, water treatment, pumping of acids and alkalis, boiler feed, and applications involving temperature control with exposure to very high, low or fluctuating temperatures.

Whatever the particular challenges of your installation – for example, limited space, earthquake risk, high altitude or certification issues – the CR range has all bases covered.


Features and benefits

  • Quality and reliability built on over four decades of continuous Grundfos testing and refinement
  • Corrosion-resistant pump modules that can be combined in multiple ways to meet almost every conceivable requirement.
  • Streamlined design to save space
  • Grundfos MGE motor with integrated frequency converter to allow multi-speed operation and deliver optimal pump performance
  • Special pump solutions to cope with extraordinarily high pressure, temperature extremes and liquids that are very aggressive, abrasive, hazardous, hardening or flammable

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner   LEADER Pump


Grundfos SQ

Posted by on Monday, 11 May, 2015

The Grundfos SQ 3″ submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.

The SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times.

 

grundfos SP

 

 

 

 

 

Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.

If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.

Applications

SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:

  • Ground water supply – private housing, small waterworks, small irrigation systems
  • Liquid transfer in tanks
  • Pressure boosting
  • Environmental applications – remedial pumping or sampling
  • Garages and petrol stations.

Features and benefits

  • Dry-running protection
  • Permanent magnet motor with high efficiency
  • Wear resistance from floating impellers
  • Protection against upthrust
  • High flow velocity
  • Soft-starts reduce wear on motor
  • Over- and under-voltage protection
  • Overload protection
  • Over-temperature protection.

Additional features of the SQE

  • Variable motor speed controls (with connection to the CU 301)
  • Connection to the CU 301 for two-way communication.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner


Grundfos DWK

Posted by on Monday, 11 May, 2015

DWK and DPK are submersible pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

 

Grundfos DWK

 

 

 

 

 

 

Applications

DWK/DPK are excellent pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for temporary or fixed installation. The installation design options provide the flexibility needed to cover many needs. Applications include:

  • Construction sites
  • Excavations
  • Tunnels
  • Fish ponds
  • Drainage pits.

 

Features and benefits

  • Durability
  • High efficiency
  • Installation flexibility
  • High-pressure capabilities, cost-effectiveness.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner


Grundfos DP

Posted by on Sunday, 10 May, 2015

The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.

 


 

 

 

 

DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.

The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.

Pumped liquids

The pumps are suitable for:

  • Drainage and surface water
  • Groundwater
  • Industrial process water without solids or fibres.

Features and benefits

  • Cable plug connection
  • Unique clamp connection
  • Specially designed lifting handle
  • Unique cartridge shaft seal
  • Modular design
  • Heavy-duty ball bearings.

 

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

 


Grundfos JP Booster

Posted by on Sunday, 10 May, 2015

The JP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G 1 or Rp 1. The pump has a built-in ejector with guide vanes for optimum self-priming properties.

 

 

 

 

 

 

JP pumps are available in two material variants.

Material variant A: Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.

Material variant B: Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.

The robust design makes the pump suitable for fixed installation. The custom-built composite handle is fitted lengthwise.

The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance Single-phase motors have a built-in thermal switch and require no additional motor protection Three-phase motors require external motor protection

Applications

Built for a long, trouble-free working life, the small and handy Grundfos jet pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.

When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.

Features and benefits

  • Self-priming
  • Stable operation even if there is air in the liquid
  • Ideal for small water supply systems
  • Compact and handy.

 

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner