The Grundfos SQ 3” submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.

The SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times.

Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.

If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.

Applications

SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:

• Ground water supply – private housing, small waterworks, small irrigation systems
• Liquid transfer in tanks
• Pressure boosting
• Environmental applications – remedial pumping or sampling
• Garages and petrol stations.

Features and benefits

• Dry-running protection
• Permanent magnet motor with high efficiency
• Wear resistance from floating impellers
• Protection against upthrust
• High flow velocity
• Soft-starts reduce wear on motor
• Over- and under-voltage protection
• Overload protection
• Over-temperature protection.

Additional features of the SQE

• Variable motor speed controls (with connection to the CU 301)
• Connection to the CU 301 for two-way communication.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The AeroJet is a self-aspirating aerator that keeps aerobic treatment processes running and also helps to avoid odour problems in wastewater storage, as anaerobic zones can be eliminated.

AeroJets are a flexible way of providing both mixing and aeration with the same device. AeroJets are easy to install, operate and maintain, as they do not require any blowers, air distribution piping or control valves.

The flexibility of the AeroJet offers distinct advantages for upgrading aeration capacity to meet increased oxygen demands. It can be used either alone or as a supplement to existing aeration equipment.

AeroJets are available in many different sizes to ensure that all needs can be met, no matter what the size and shape of the tank.

Applications

AeroJets are ideal in applications where aeration is needed to enhance biological processes, to avoid odour problems, or to supply oxygen in:

• Municipal or industrial WWTP
• Stabilisation and equalisation tanks
• Fish farms

Or in applications where flexible oxygen supply is essential:

• Refurbishment of treatment plants
• Boosting oxygen supply at peak loads
• Avoiding oxygen depletion in lakes or channels

Features and benefits

• Handles both aeration and mixing
• Self-aspirating aerator – no need for additional air distribution pipes, blowers or valves
• Submerged aerator increases oxygen transfer time
• Submerged installation reduces noise and limits aerosol formation at the tank
• Available as a free-standing unit or with the pump on an auto-coupling
• Can easily be installed or repositioned even while processes are running
• Fit all tanks, regardless of size and shape
• Made completely in stainless steel for strength
• Fed by a submersible wastewater pump of the SL, SE or S types
• Large free passage – no clogging

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.

The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. There are eleven flow sizes, capable of producing up to almost 50 bar of pressure, and with a variety of shaft seals, rubber materials and supply voltages.

Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimised for their purpose and designed for specific requirements.

Applications

CR pumps provide a complete range of pump solutions so that all applications, industrial and domestic, can benefit from the Grundfos touch. The applications that can be covered include the following:

• Process water systems
• Washing and cleaning systems
• Seawater systems
• Pumping of acids and alkalis
• Ultrafiltration systems
• Reverse osmosis systems
• Swimming baths.

Features and benefits

• Reliability
• High efficiency
• Service-friendly
• Space-saving
• Suitable for slightly aggressive liquids
• High corrosion resistance
• Single-pump solution making high pressures possible.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.

The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.

The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor is cooled by the pumped liquid flowing around it.

• Enclosure class: IP 68
• Insulation class: F

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.

Applications

The Grundfos Unilift KP pumps are designed for the pumping of:

• Water and rainwater in horticulture
• Water from rivers and lakes
• Rainwater, drainage water and water from flooding
• Water for filling/emptying containers, ponds, tanks, etc.
• Effluents from showers, washing machines and sinks below sewer level
• Pool water
• Ditch drainage water
• Groundwater (lowering applications)
• Domestic effluents from septic and sludge-treating systems
• Effluents from viaducts, underpasses, etc.
• Drainage water from garage sprinkler systems.

The Grundfos SQ 3” submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.

The SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times.

Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.

If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.

Applications

SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:

• Ground water supply – private housing, small waterworks, small irrigation systems
• Liquid transfer in tanks
• Pressure boosting
• Environmental applications – remedial pumping or sampling
• Garages and petrol stations.

Features and benefits

• Dry-running protection
• Permanent magnet motor with high efficiency
• Wear resistance from floating impellers
• Protection against upthrust
• High flow velocity
• Soft-starts reduce wear on motor
• Over- and under-voltage protection
• Overload protection
• Over-temperature protection.

Additional features of the SQE

• Variable motor speed controls (with connection to the CU 301)
• Connection to the CU 301 for two-way communication.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner

Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.

The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.

The Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.

Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.

Applications

The pumps are suitable for:

• Drainage
• Effluent
• Wastewater not containing discharge from toilets.

Features and benefits

• Cable plug connection
• Unique clamp connection
• Specially designed lifting handle
• Unique cartridge shaft seal
• Modular design
• Heavy-duty ball bearings
• Short rotor shaft.

PT. Andalan Inti Rekatama  –  GRUNDFOS  Authorized Dealer   – Service Partner