Tag » Booster Hydro MPC « @ PT. Andalan Inti Rekatama ( PT.AIR )

Grundfos Pressure Booster Multi Pump Control -The brains behind the boosting

Posted by admin on Friday, 29 May, 2015

Pressure Booster : Grundfos Hydro MPC

Grundfos has developed the perfect brains for use with CR-based Hydro booster systems. The Multi Pump Control ( MPC ) maintains its outstanding user friendliness right from the initial installation through to everyday operation.

The large display is easy to navigate, regardless of whether you are using the installation wizard or carrying out day – to – day monitoring. The Ethernet connection option even brings the Hydro MPC interface to your own computer so that matter where you are, you will always be in control.

The Hydro MPC can control up to six pumps connected in parallel, adjusting the speed of each pump to optimize performance at all times.

The Hydro MPC also gives you access to remote data communication, operation statistics, and mauch more.

Features and benefits
– Constant pressure
– Simple installation
– Low-energy
– Wide range

Optional:
– External communication, Control 2000

Applications
Hydro 2000 are suitable for pressure boosting in
– Water supply systems
– Irrigation systems
– Water treatment systems
– Fire fighting systems
– Industrial plants

Technical Data
– Flow Q: max. 720 m3/h
– Head, H: max. 160 m
– Liquid temp.: 0oC to +70oC

PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner – Grundfos Booster Hydro MPC

Category: Booster Hydro MPC, Commercial Building Services Booster Hydro MPC, Grundfos, MPC, Pressure boosting

Comments (2)

Grundfos Hydro MPC – Booster set

Posted by admin on Wednesday, 27 May, 2015

Grundfos Hydro MPC – Booster set

Hydro MPC booster sets consist of two to six identical CRI(E)/CR(E) pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

As standard, Hydro MPC booster sets consist of two to six identical CRI(E)/CR(E) pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

Hydro MPC booster sets are supplied as complete, pre-assembled and thoroughly tested booster sets, ready to install.

Most of the booster sets are available with either CR(I) pumps and/or CR(I)E pumps.

Hydro MPC booster sets are divided into seven groups based on control variants.

Hydro MPC’s outstanding reliability and efficiency is the best possible base for our booster systems. Equipped with the intelligent CU 351 controller, the Hydro MPC boosters offer an even higher efficiency and reduced energy costs. The end result is complete control, optimum flexibility of booster output, and unbeatable efficiency at all times.

Hydro MPC booster sets are fitted with hygienic designed manifolds.

Water Supply

Grundfos Hydro MPC boosters are ideal for mains water supply systems and for pressure boosting in multi-storey buildings. The needs for water in multi storey buildings vary a lot during the course of the day – this demands much from the equipment used. With a Grundfos booster system, it is easy to provide optimum user comfort by maintaining constant water pressure at all levels and at all times.

Industry

Industries can also benefit greatly from a booster solution from Grundfos. If you require constant pressure in the face of highly variable flows, Grundfos has the solution. Even the most demanding applications will benefit from the accuracy and advanced pump control in a Grundfos Hydro MPC booster.

Irrigation

A Grundfos Hydro MPC booster system can help conserve water and optimise crop yields by responding to pre-set minimum and maximum levels. Grundfos Hydro MPC is lenient on the pipe net in golf course irrigation systems and adapts the performance automatically to any number of sprinklers at any pressure zone during the irrigation cycle. It is benefits like these that make Grundfos the perfect choice for irrigation systems.

PT. Andalan Inti Rekatama – GRUNDFOS Authorized Dealer – Service Partner – Grundfos Booster Hydro MPC

Category: Booster Hydro MPC, Commercial Building Services, Grundfos Pumps Booster Hydro MPC, pompa grundfos, Pressure boosting

Comments (1)

Grundfos Pressure Boosting : Calculating What You Need !

Posted by admin on Tuesday, 10 January, 2012

The calculation of flow, pressure and load profile is important to identity the correct pump system for your installation. Below a few examples of how to calculate the right flow and examples of the related load profile.

For more specific calculations to your installation, contact us , We will be happy to be of assistance.

School :

Calculation of max. flow for system design		Example
Units	1 pupil	700
Total consumption per bed	8 m3/year	5,600 m3/year
Consumption period	200 day/year	(5,600/200)
Average consumption per day	0.04 m3	28.0 m3
Factor for maximum consumption	1.3	(28 x 1.3)
Maximum consumption per day	0.065 m3	36.4 m3
Factor for peak flow per hour	2.5	(36.4 x 2.6)/24
Dimensioning flow per hour/bed	0.046 m3/h	3.8 m3/h

Apartement Blocks :

Calculation of max. flow for system design		Example
Units	1 residence	65
Total consumption per bed	183 m3/year	11,895 m3/year
Consumption period	365 day/year	(11,895/365)
Average consumption per day	0.5 m3	32.6 m3
Factor for maximum consumption	1.3	(32.6 x 1.3)
Maximum consumption per day	0.065 m3	42.4 m3
Factor for peak flow per hour	2.5	(42.4 x 1.7)/24
Dimensioning flow per hour/bed	0.007 m3/h	3 m3/h

Hospital :

Calculation of max. flow for system design		Example
Units	1 bed	600
Total consumption per bed	300 m3/year	180,000 m3/year
Consumption period	365 day/year	(180,000/365)
Average consumption per day	0.8 m3	493.2 m3
Factor for maximum consumption	1.2	(493.2 x 1.2)
Maximum consumption per day	0.96 m3	591.8 m3
Factor for peak flow per hour	3.0	591.8 x 3)/24
Dimensioning flow per hour/bed	0.12 m3/h	73.9 m3/h